Carpenter Tools
Showing 1–45 of 77 results
-
-
-
Malleable cast iron screw clamps
Original BESSEY all-steel screw clamp GZ with 2-component plastic handle
Malleable cast iron screw clampsOriginal BESSEY all-steel screw clamp GZ with 2-component plastic handle
20 % more clamping force per spindle rotation with optimised rail profile.
Maximum security with linear transfer of force at the sliding arm.
Clamping force up to 6,000 N.
Fixed jaw and sliding arm are constructed of tempered steel for resilient clamping.
High-quality 2-component plastic handle.
SKU: GZ Series -
-
Malleable cast iron screw clamps
STC-IHA15 ush/pull clamp with angled base plate
Moving the handle moves the push-pull rod Automatic and infinitely variable adjustment of the clamping height up to 8 mm while clamping force remains unchanged – without having to make manual changes to the position of the pressure screws Adjustable clamping force up to 1,100 N, based on the adjusting screw in the joint Sturdy, tempered metal sheets for a long service life Base plate hole pattern suitable for millimetres and inches High-quality oil resistant two-component plastic handle with slip protection
SKU: STC-IHA15 -
Malleable cast iron screw clamps
STC‑VH Vertical toggle clamp with open arm and horizontal base plate
Malleable cast iron screw clampsSTC‑VH Vertical toggle clamp with open arm and horizontal base plate
Lever is in vertical clamping position.
Automatic, seamless adjustment of theclamping height up to 35 mm with almost constant clamping force – without manual changing of the pressing screw position.
Adjustable clamping force up to 2,500 N, based on the adjusting screw in the joint.
Sturdy, tempered sheet steel for longer service life.
Base plate hole pattern suitable for millimetres and inches.
SKU: STC‑VH -
Malleable cast iron screw clamps
KRE Series K Body REVO parallel clamp 300-2500mm
Clamping force up to 8,000 N.
Very large parallel clamping surfaces with 3 removable pressure caps
Metal-reinforced plastic housing and optimised sliding arm with double slide protection for more power and safety:
The set clamping force is maintained and the sliding arm cannot unintentionally slip in the unclamped condition.SKU: KRE -
Malleable cast iron screw clamps
TG-2K Series Original BESSEY malleable cast iron screw clamp TG with 2‑component plastic handle
Malleable cast iron screw clampsTG-2K Series Original BESSEY malleable cast iron screw clamp TG with 2‑component plastic handle
Clamping force up to 6,000 N
High-quality 2-component plastic handle
Pressure plates can be replace by hand – no tools required (from 80 mm throat depth)
With protective caps on the clamping surfaces
Stable profiled rail with serration
BESSEY anti-slip system (from 80 mm throat depth)SKU: TG-2K Series -
-
-
-
-
-
-
Forstner Bit BORMAX
1622 Forstner bit BORMAX 2.0 for wood working, Profi. Made in Germany
Rapid drilling in soft wood, European hard wood, chipboard, MDF etc. Rapid chipping of solid wood and chipboards. Clearly less effort is needed and boring is more rapid than with the usual Forstner bit
SKU: 1622 -
Forstner Bit BORMAX
1624 forstner bit with pilot guilded Bormax 2.0 Prima, Made in Germany
The pilot-drill bit is ideal for drilling at an angle which is not 90° in workpieces surface, which occurs for example in the construction of staircase. Can be used with the centre point as traditional Bormax
SKU: 1624 -
Forstner Bit BORMAX
1614 Bormax® 2.0 Prima, Long Version (Special Counterbore)
Bormax® 2.0 prima with exchangeable pre-drill bit, centre drill bit or guiding pin. Much less feed force needed as well as minimized friction and therefore less heat generation. Reasons: The two main cutting edges are grooved shifted, as well as the toothed linear grooved pre-cutters. A matching centre drill bit and an allen wrench are included in the delivery. Hexagonal shank for a better power transfer
SKU: 1614 -
-
-
-
-
Forstner Bit BORMAX
1616 Disc + Plug Cutter 400 – 1500 rpm. Alloyed tool steel
Twofold ground main cutting edges and circumferential cutters. Effective length of the plug max. 70 mm
Place 1616 at the edge of the work piece in a way that the outside of the cutter is overlapping the edge, allowing fast chip ejection
SKU: 1616 -
Forstner Bit BORMAX
1410 Auger Bit, Lewis Pattern, 500 – 2800 rpm. FAMAG Germany
“Lewis” pattern, crest of thread, main cutting edge and taper tap in premium quality. Version with stepped head and hexagonal shank from Ø 8mm.
500 – 2800 rpm. e.g. Ø 12 mm 2000 rpm in soft wood. Further details in the speed diagram
SKU: 1410 -
-
Forstner Bit BORMAX
1494 Main cutting edge Auger Bit 1750 – 3000 rpm. FAMAG Germany
Specially formed channel for removing chips, teflon-coated, changeable crest of thread HSS, two carbide tipped main cutting edges, protruding cutting edges and cylindrical shank with three clamping surfaces. Ground by diamond wheels on CNC-machines
SKU: 1494 -
-
-
-
-
-