Returning Customer ?
Don't have an account ?
Showing 1–45 of 61 results
Twist drill, made of cobalt alloyd HSS-G, acc. to DIN 338, fully ground from the solid. Fitted with a special spiral for good chip removal and greasing materials. Crosswise sharpened acc. to DIN 1412C, point angle 135°
For power drills 43 mm. For drill bits Ø 8, 10, 12, 14, 16, 18, 20, 22, 24, 26 mm. Version with two solid guide rods. Tool holder and foot made of cast aluminium. Springs and guide posts made of stainless steel.
For power drills 43 mm. Packing unit = 1, in carton. Tool holder and foot made of cast aluminium, guide posts made of stainless steel Made in Germany.
Due to the pivoting fixture also applicable for curved cheeks. For staircase > 45° please use a shim. Packing unit = carton.
Rapid drilling in soft wood, European hard wood, chipboard, MDF etc. Rapid chipping of solid wood and chipboards. Clearly less effort is needed and boring is more rapid than with the usual Forstner bit
The FAMAG 1623 Forstner bit (BORMAX 2.0) is a long version for woodworking. It features grooved cutting edges, low heat development, and rapid drilling in various wood materials. Suitable for freehand and stationary use. Made in Germany.
The pilot-drill bit is ideal for drilling at an angle which is not 90° in workpieces surface, which occurs for example in the construction of staircase. Can be used with the centre point as traditional Bormax
Bormax® 2.0 prima with exchangeable pre-drill bit, centre drill bit or guiding pin. Much less feed force needed as well as minimized friction and therefore less heat generation. Reasons: The two main cutting edges are grooved shifted, as well as the toothed linear grooved pre-cutters. A matching centre drill bit and an allen wrench are included in the delivery. Hexagonal shank for a better power transfer
1664 cylindrical boring bit is a high-quality and versatile tool for precise drilling in wood and plastics. It features carbide-tipped cutting edges for durability and can handle hard and coated materials. The package includes an exchangeable center point, a 4mm pre-drill bit, and an allen key. Suitable for deep hole drilling with extension shanks.
The first carbide tipped Forstner bit with centre point, carbide-tipped main cutting edge and toothed circumferential cutter. Hexagonal shank for a better power transfer
It features carbide tips, two cutting edges, and two spurs. Precisely ground with a diamond wheel, it provides tear-free, accurate drillings in hard wood, chipboards, and plastics. It offers an effortless drilling experience and is recommended for stationary use.
600 – 6000 rpm. e.g. Ø 68 mm 1300 rpm in European hard wood. Further details in the speed diagram
Traditional Forstner bit with centre point, two main cutting edges and two circumferential cutters. Low friction due to the reduced peripheral cutting edge
Traditional cylinder boring bit with centre point, two main cutting edges and two taper taps. 700 – 3000 rpm. e.g. Ø 15 mm 2300 rpm in soft wood. Further details in the speed diagram
Twofold ground main cutting edges and circumferential cutters. Effective length of the plug max. 70 mm
Place 1616 at the edge of the work piece in a way that the outside of the cutter is overlapping the edge, allowing fast chip ejection
“Lewis” pattern, crest of thread, main cutting edge and taper tap in premium quality. Version with stepped head and hexagonal shank from Ø 8mm.
500 – 2800 rpm. e.g. Ø 12 mm 2000 rpm in soft wood. Further details in the speed diagram
500 – 800 rpm e.g. Ø 40 mm 800 rpm in soft wood. Further details in the speed diagram Made in Germany
2800 – 3600 rpm e.g. Ø 18 mm 2800 rpm in glulam (glue laminated timber, on joinery machines) Made in Germany
“Lewis” pattern with crest of thread, main cutting edge and taper tap, morse cone shank No. 2
1250 – 2500 rpm e.g. Ø 22 mm 1500 rpm in soft wood. Further details in the speed diagram
Specially formed channel for removing chips, teflon-coated, changeable crest of thread HSS, two carbide tipped main cutting edges, protruding cutting edges and cylindrical shank with three clamping surfaces. Ground by diamond wheels on CNC-machines
“Lewis” pattern with crest of thread, main cutting edge and bottom blade. 700 – 2250 rpm e.g. Ø 12 mm 1500 rpm in European hard wood. Further details in the speed diagram
Twist drill with long shank and specially ground roof-like tip, which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations. 800 – 2500 rpm, e.g. Ø 10 mm 2500 rpm in formwork panel. Made in Germany
Twist drill with long shank and specially ground roof-like tip which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations
Twist drill with long shank (SDS-plus) and specially ground roof-like tip which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations
“Lewis” pattern, with crest of thread, one main cutting edge and one taper tap. With lug for wooden handle For drilling deep holes in soft wood (depending on the diameter) and also limited in European hard wood
Brad point drill bit with extra long brad point (ground three-edged), two main cutting edges, two taper taps, four grooves on the spiral.
800 – 2500 rpm e.g. Ø 16 mm 2000 rpm in soft wood
FAMAG 1591 is a German-made HSS brad point drill bit designed for precision in woodworking. Ideal for softwood, European hardwood, and MDF, it’s optimized for cordless screwdrivers, ensuring accurate and clean drilling.
TCT brad point drill bit, cylindrical, two main cutting edges, two taper taps. Spiral form N. 4.000 – 10.000 rpm e.g. Ø 5 mm 8.000 rpm in European hard wood. Further details in the speed diagram.
Premium version, fully ground quality with two main cutting edges and two taper taps. Specially ground spiral for a very good chip removal. 2400 – 8000 rpm e.g. Ø 4 mm 5000 rpm in European hard wood. Further details in the speed diagram
One-piece drill bit (C6,3) with brad point, two main cutting edges, two protruding cutting edges and a hexagonal shank for bit holder (1/4“; C 6,3). Maximum rotation speed of the cordless screwdriver: recommended 3000 rpm
Premium quality version, extra long, fully ground quality with two main cutting edges and two taper taps. Internally ground special spiral for very good chip removal
Two straight main cutting edges with chip breaking flutes. With stepped cylindrical shank Ø 13 or 16 mm.
2200 – 4000 rpm. e.g. Ø 16 mm 2200 rpm in soft wood. Further details in the speed diagram
With brad point, two main cutting edges and protruding cutting edges. 1000 – 5000 rpm e.g. Ø 5 mm 5000 rpm in softwood. Further details in the speed diagram
With brad point, two main edges and protruding cutting edges. Chrome Vanadium steel. 1500 – 4000 rpm e.g. Ø 5 mm 4000 rpm in soft wood. Further details in the speed diagram. FAMAG – Germany.
Seven-edged countersink with pointed angle 90°, irregular pitch, with fully ground tool head for finest results. 1000 – 2500 rpm. e.g. Ø 16 mm 1800 rpm in soft wood. Further details in the speed diagram
One-edged countersink with bored hole and countersinking angle of 90°.
600 – 1000 rpm. e.g. Ø 16 mm 800 rpm in soft wood
Twist drill, made of cobalt alloyed HSS, acc. to DIN 338, fully ground from the solid. Fitted with a special spiral for good chip removal and greasing materials. Crosswise sharpened acc. to DIN 1412C, point angle 135°, tolerance of diameter h8
500 – 2500 rpm. e.g. Ø 12 mm 2000 rpm in soft wood. Further details in the speed diagram
Titanium nitrified twist drill, fully ground from the solid, right hand cutting, with spiral type N. Crosswise sharpened acc. to DIN 1412C (from 3,0 mm) 118° for good centering and fast drilling. Tolerance of diameter h8. Professional hard-wearing coating for a long service life
Twist drill made of cobalt alloyed HSS-G, acc. to DIN 340, fully ground from the solid, long version, special spiral form, for a good chip removal when drilling deep holes and for greasing materials. Crosswise sharpened acc to. DIN 1412C, point angle 135°, tolerance of diameter h8
Special twist drill made of cobalt alloyed HSS, acc. to DIN 1869, fully ground of the solid, extra long version, right hand cutting. Profile crosswise sharpened 135°
