Returning Customer ?
Don't have an account ?
Showing 91–133 of 133 results
Features stainless steel, forged blades for plain slotted screws, through-hardened without galvanic treatment. It includes nonslip QUATROLIT®-2C handles, suspension holes, and complies with DIN ISO 2380-2 and 2380-1 standards.
Screwdriver Socket 3/8″ Long 3244-TXL-45, designed for inside TORX® screws, features chrome-plated finish, knurled grip, durable materials, and precision engineering for reliable TORX® screw work. By Elora made in Germany.
Flathead screwdriver series features various blade sizes for different screw types, with nickel-plated forged steel construction and durable QUATROLIT®-2C handles. Blade made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242.
Torque Multiplier combination and extension shaft. EA2-N driving by battery torque multipliers EFCip-N with 14 models and according to IP54. CLD-N pneumatic torque multipliers, ATEX upon on request. There are 03 extension lengths 10, 12, 18 inchs
compatible with HP/HSP/HXP series cylinders, include a puller block, two connecting rods, and bearing splitters for diameters 12-225 mm. Available in 4-ton, 6-ton, 8-ton, and 12-ton variants, each set caters to different bearing sizes.
BESSEY VarioClippix XV spring clamp offers variable opening widths up to 100mm, featuring a lightweight, sturdy design with an ergonomic handle and protective caps for gentle clamping on sensitive workpieces.
ELORA 262 flat chisel series, forged from ELORA-Chrome-Vanadium steel, offers durability and precision for metalwork, with a range of sizes and weights to suit diverse tasks. Made in Germany.
“Lewis” pattern, with crest of thread, one main cutting edge and one taper tap. With lug for wooden handle For drilling deep holes in soft wood (depending on the diameter) and also limited in European hard wood
600 – 6000 rpm. e.g. Ø 68 mm 1300 rpm in European hard wood. Further details in the speed diagram
acc. to workshop grade • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • graduation reading from left to right, zero-point in the middle • top and bottom 1/1 mm graduation
acc. to DIN 2014/32/EU • reading from left to right or right to left • precise, deep graduation laser engraved, continuing numbers • non glare, matt surface • stainless spring steel • with identification-no
Numbering up to 500 mm lenght with continuing mm numbering. The rules from 1000 mm up to 2000 mm lenght with continuing cm numbering. The rules according to EC Class I and are qualified as reference pieces.
Double layer band lifting system, standard, security factor 7:1
for inside hexagon screws blades nickel plated with black T-Handle and suspension hole ELORA-Chrome-Vanadium 59CrV4 / 1.2242 DIN ISO 2936
Premium version, fully ground quality with two main cutting edges and two taper taps. Specially ground spiral for a very good chip removal. 2400 – 8000 rpm e.g. Ø 4 mm 5000 rpm in European hard wood. Further details in the speed diagram
Carton box packed Flat and straight pattern. Thin-walled heads Matt chrome plated Chrome-Vanadium 31CrV3 / 1.2208 According to DIN 837, Form B, ISO 3318, ISO 1085
in plastic rolling pouch with suspension eye deep cranked, with thin-walled heads matt chrome plated break resistance and shatterproof quality minimize risk of injury ELORA-Chrome-Vanadium 31CrV3 / 1.2208
A versatile German-made tool with a distinctive black phosphate coating. It complies with DIN 895, ISO 3318, and ISO 1085 standards. Featuring double-ended jaws, each with two different sizes, with sizes ranging from 6x7mm to 75x80mm.
Made in Germany, meets DIN 894 standards. It features a black phosphate coating, 15-degree angled jaw, and is crafted from durable high-grade tool steel. Available in sizes 6mm to 110mm, it’s ideal for precision tasks.
Fitted with a screw spindle which allows easy adjustment and high clamping force to the various flange sizes within its capacity. Designed to provide smooth and easy traversing.
Designed for both vertical and side loading applications – can be loaded at any angle
Twist drill with long shank and specially ground roof-like tip, which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations. 800 – 2500 rpm, e.g. Ø 10 mm 2500 rpm in formwork panel. Made in Germany
Premium quality version, extra long, fully ground quality with two main cutting edges and two taper taps. Internally ground special spiral for very good chip removal
Hydraulic single acting BETEX JLLC cylinders offer 50-1000 ton capacity, 50-300 mm stroke, and 700 bar pressure. Features include a safety locknut, piston protection ring, interchangeable saddle, high-flow coupler, and a durable black nitride finish for heavy-duty applications.
Spanner with 02 sizes open, non-sparking, according to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Material Cu-Be. Made by ELORA Germany. Other size upon on request.
With straight edge and point working end hardened Material: high grade tool steel C45 / 1.0503. ELORA Germany.
BETEX ALNC cylinders: lightweight aluminum, 50-100 ton capacity, 50-250 mm stroke, 700 bar pressure, locknuts for safety, easy handling, heavy-duty spring, roll-polished interior, corrosion-resistant anodized coating.
BETEX NDAH hydraulic cylinders: double-acting, hollow, 30-100 ton capacity, 76-257 mm stroke, 700 bar max pressure, hard chromed piston, roll-polished rams, black nitride finish, versatile for heavy-duty applications.
BETEX NSLS flat hydraulic cylinders: low height, spring return, single acting, 5-150 ton capacity, 6-17 mm stroke, 700 bar pressure, hard chromed piston, roll-polished rams, black nitride finish, compact design.
With brad point, two main cutting edges and protruding cutting edges. 1000 – 5000 rpm e.g. Ø 5 mm 5000 rpm in softwood. Further details in the speed diagram
– Now available with slipping clutch overload protection – Range 750kg – 10.0t – Equipped with our unique dual brake mechanism – New twin pawl ratchet brake design allows for very fine adjustments on the lifting
Beam width range 75mm to 457mm Operating temperature of -50°C to +50°C 4:1 factor of safety Up to 90° side loading with no deration 15° cross loading with no deration
Twist drill made of HSS, fully ground from the solid, long version, cylindrical, special spiral for good chip removal when drilling deep holes and for greasing materials. Profile crosswise sharpened acc. to DIN 1412C, point angle 135°. Tolerance of diameter h8
Twist drill, made of cobalt alloyed HSS, acc. to DIN 338, fully ground from the solid. Fitted with a special spiral for good chip removal and greasing materials. Crosswise sharpened acc. to DIN 1412C, point angle 135°, tolerance of diameter h8
Titanium nitrified twist drill, fully ground from the solid, right hand cutting, with spiral type N. Crosswise sharpened acc. to DIN 1412C (from 3,0 mm) 118° for good centering and fast drilling. Tolerance of diameter h8. Professional hard-wearing coating for a long service life
One-piece twist drill bit, fully ground from the solid, long version with hexagonal shank for bit holder (1/4“; E 6,3), polished section of the surface of the cone 118°, blank ground
One-piece twist drill bit, fully ground from the solid, short version with hexagonal shank for bit holder (1/4“; C 6,3), polished section of the surface of the cone 118°, blank ground
Bluetooth-enabled data transfer and on-site settings. It includes robust, mobile-ready torque multipliers with multilingual OLED displays, ensuring compliance with international standards and enhanced operational safety and efficiency.