Returning Customer ?
Don't have an account ?
Showing 136–180 of 216 results
Bormax® 2.0 prima with exchangeable pre-drill bit, centre drill bit or guiding pin. Much less feed force needed as well as minimized friction and therefore less heat generation. Reasons: The two main cutting edges are grooved shifted, as well as the toothed linear grooved pre-cutters. A matching centre drill bit and an allen wrench are included in the delivery. Hexagonal shank for a better power transfer
1664 cylindrical boring bit is a high-quality and versatile tool for precise drilling in wood and plastics. It features carbide-tipped cutting edges for durability and can handle hard and coated materials. The package includes an exchangeable center point, a 4mm pre-drill bit, and an allen key. Suitable for deep hole drilling with extension shanks.
The first carbide tipped Forstner bit with centre point, carbide-tipped main cutting edge and toothed circumferential cutter. Hexagonal shank for a better power transfer
It features carbide tips, two cutting edges, and two spurs. Precisely ground with a diamond wheel, it provides tear-free, accurate drillings in hard wood, chipboards, and plastics. It offers an effortless drilling experience and is recommended for stationary use.
600 – 6000 rpm. e.g. Ø 68 mm 1300 rpm in European hard wood. Further details in the speed diagram
Traditional Forstner bit with centre point, two main cutting edges and two circumferential cutters. Low friction due to the reduced peripheral cutting edge
Traditional cylinder boring bit with centre point, two main cutting edges and two taper taps. 700 – 3000 rpm. e.g. Ø 15 mm 2300 rpm in soft wood. Further details in the speed diagram
Twofold ground main cutting edges and circumferential cutters. Effective length of the plug max. 70 mm
Place 1616 at the edge of the work piece in a way that the outside of the cutter is overlapping the edge, allowing fast chip ejection
“Lewis” pattern, crest of thread, main cutting edge and taper tap in premium quality. Version with stepped head and hexagonal shank from Ø 8mm.
500 – 2800 rpm. e.g. Ø 12 mm 2000 rpm in soft wood. Further details in the speed diagram
500 – 800 rpm e.g. Ø 40 mm 800 rpm in soft wood. Further details in the speed diagram Made in Germany
2800 – 3600 rpm e.g. Ø 18 mm 2800 rpm in glulam (glue laminated timber, on joinery machines) Made in Germany
“Lewis” pattern with crest of thread, main cutting edge and taper tap, morse cone shank No. 2
1250 – 2500 rpm e.g. Ø 22 mm 1500 rpm in soft wood. Further details in the speed diagram
Specially formed channel for removing chips, teflon-coated, changeable crest of thread HSS, two carbide tipped main cutting edges, protruding cutting edges and cylindrical shank with three clamping surfaces. Ground by diamond wheels on CNC-machines
“Lewis” pattern with crest of thread, main cutting edge and bottom blade. 700 – 2250 rpm e.g. Ø 12 mm 1500 rpm in European hard wood. Further details in the speed diagram
Compact, lightweight mechanical flange spreader with 7-ton force. Reversible claws, safe, easy to use. Ideal for small flanges (2.0mm minimum). Can be used single or paired (14-ton force). Portable, time-saving, in PE case.
• Heat-treated and chrome-plated hydraulic rod provides longer seal life and optimum performance. • Internal safety valve prevents toe jack being used beyond its rated capacity
Dimensions mm (lxwxh): 357x305x96 mm Weight incl. all parts case: 2.75 kg Displayed resolution: 0.01 mm
max. cap.: 15 ton Pump type: single-acting Max. pressure bar: 700 Weight: 4kg
max. cap.: 30 ton Pump type: single-acting Function: lifting & spreading Max. pressure bar: 700 Weight: 28kg
The Hydraulic Lifting Wedge HLW 18TI is a versatile and reliable tool with an integrated pump, designed for lifting heavy loads with precision and safety. Its robust construction, ease of use, and space-saving design make it an efficient solution for various lifting applications.
max. cap.: 15 ton Pump type: single-acting Function: lifting & spreading Max. pressure bar: 700 Weight: 16kg
max. cap.: 30 ton. Pump type: single-acting. Function: lifting & spreading. Max. pressure bar: 700. Weight: 28kg
• Hydraulic lifting wedge • 2-stage hand pump • Hose 2.1 mtr • Stepped safety block + multi-stage block • Manometer, T-adapter • Male (hose) half coupler, complete quick coupler • PE case
The Betex HLW18T-Duo hydraulic wedge set is designed to provide a perfect straight lifting movement, preventing the load from tilting and ensuring maximum safety during use.
max. cap.: 25 ton Pump type: single-acting Function: lifting & spreading Max. pressure bar: 700 Weight: 4kg
max. cap.: 50 ton Pump type: single-acting Function: lifting & spreading Max. pressure bar: 700 Weight: 36kg
Steel single acting cylinder, short stroke. All rams are single acting with spring return. Hard chromed piston. Rams inside roll-polished, outside blasted with black nitride finish. Bega Special Tools – BETEX Hydraulic.
Hollow, spring return, single acting, 30-60 ton capacity, 50-150 mm stroke, 700 bar pressure, lightweight, chrome plated center hole, side load protection, hard-anodized coating, safety features. BETEX – Netherland.
BETEX ADHC cylinders: lightweight aluminum, hollow, double-acting, 30-60 ton capacity, 50-250 mm stroke, 700 bar pressure, steel piston, chrome-plated center hole, carrying handles, hard-anodized coating, piston blow-out protection.
BETEX ALNC cylinders: lightweight aluminum, 50-100 ton capacity, 50-250 mm stroke, 700 bar pressure, locknuts for safety, easy handling, heavy-duty spring, roll-polished interior, corrosion-resistant anodized coating.
Hydraulic single acting BETEX JLLC cylinders offer 50-1000 ton capacity, 50-300 mm stroke, and 700 bar pressure. Features include a safety locknut, piston protection ring, interchangeable saddle, high-flow coupler, and a durable black nitride finish for heavy-duty applications.
BETEX JLPC hydraulic cylinders, high tonnage, compact, feature load return, safety locknut, and blow-out protection. Ideal for confined spaces, these are durable and versatile for industrial applications.
BETEX NDAC hydraulic cylinders: double-acting, 10-100 ton capacity, 150-470 mm stroke, 700 bar max pressure, hard chromed piston, roll-polished rams, black nitride finish, versatile for diverse industrial applications.
BETEX NDAH hydraulic cylinders: double-acting, hollow, 30-100 ton capacity, 76-257 mm stroke, 700 bar max pressure, hard chromed piston, roll-polished rams, black nitride finish, versatile for heavy-duty applications.
BETEX NSHS Series features single-acting hydraulic hollow cylinders with spring return, offering capacities from 12 to 100 tons, strokes of 8-158 mm, hard chromed pistons, and a black nitride finish.
BETEX NSSS single-acting cylinders are robust, reliable, and suitable for a wide range of hydraulic applications. Their design features and high working pressure make them a valuable choice for industries requiring efficient and durable hydraulic systems.
Twist drill with long shank and specially ground roof-like tip, which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations. 800 – 2500 rpm, e.g. Ø 10 mm 2500 rpm in formwork panel. Made in Germany
Twist drill with long shank and specially ground roof-like tip which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations
Twist drill with long shank (SDS-plus) and specially ground roof-like tip which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations
“Lewis” pattern, with crest of thread, one main cutting edge and one taper tap. With lug for wooden handle For drilling deep holes in soft wood (depending on the diameter) and also limited in European hard wood
Brad point drill bit with extra long brad point (ground three-edged), two main cutting edges, two taper taps, four grooves on the spiral.
800 – 2500 rpm e.g. Ø 16 mm 2000 rpm in soft wood
FAMAG 1591 is a German-made HSS brad point drill bit designed for precision in woodworking. Ideal for softwood, European hardwood, and MDF, it’s optimized for cordless screwdrivers, ensuring accurate and clean drilling.
TCT brad point drill bit, cylindrical, two main cutting edges, two taper taps. Spiral form N. 4.000 – 10.000 rpm e.g. Ø 5 mm 8.000 rpm in European hard wood. Further details in the speed diagram.
Premium version, fully ground quality with two main cutting edges and two taper taps. Specially ground spiral for a very good chip removal. 2400 – 8000 rpm e.g. Ø 4 mm 5000 rpm in European hard wood. Further details in the speed diagram
One-piece drill bit (C6,3) with brad point, two main cutting edges, two protruding cutting edges and a hexagonal shank for bit holder (1/4“; C 6,3). Maximum rotation speed of the cordless screwdriver: recommended 3000 rpm