Returning Customer ?
Don't have an account ?
Showing 181–225 of 289 results
max. cap.: 30 ton. Pump type: single-acting. Function: lifting & spreading. Max. pressure bar: 700. Weight: 28kg
• Hydraulic lifting wedge • 2-stage hand pump • Hose 2.1 mtr • Stepped safety block + multi-stage block • Manometer, T-adapter • Male (hose) half coupler, complete quick coupler • PE case
The Betex HLW18T-Duo hydraulic wedge set is designed to provide a perfect straight lifting movement, preventing the load from tilting and ensuring maximum safety during use.
max. cap.: 25 ton Pump type: single-acting Function: lifting & spreading Max. pressure bar: 700 Weight: 4kg
max. cap.: 50 ton Pump type: single-acting Function: lifting & spreading Max. pressure bar: 700 Weight: 36kg
– Now available with slipping clutch overload protection – Range 750kg – 10.0t – Equipped with our unique dual brake mechanism – New twin pawl ratchet brake design allows for very fine adjustments on the lifting
An excellent cutter for steel wire rope. Notched blade holds and locks rope in cutting position. Shearing action of blades gives clean, sharp cutting of coarse or fine stranded materials with minimum distortion. Blades interchangeable with bolt cutters.
Steel single acting cylinder, short stroke. All rams are single acting with spring return. Hard chromed piston. Rams inside roll-polished, outside blasted with black nitride finish. Bega Special Tools – BETEX Hydraulic.
Hollow, spring return, single acting, 30-60 ton capacity, 50-150 mm stroke, 700 bar pressure, lightweight, chrome plated center hole, side load protection, hard-anodized coating, safety features. BETEX – Netherland.
Threaded rod wrenches ABW are tools used to remove or install materials in the form of threaded rods. This tool can be used in many fields, including construction, mechanics, electronics, and many other applications.
BETEX ADHC cylinders: lightweight aluminum, hollow, double-acting, 30-60 ton capacity, 50-250 mm stroke, 700 bar pressure, steel piston, chrome-plated center hole, carrying handles, hard-anodized coating, piston blow-out protection.
Threaded Rod Sockets BSW are a special type of socket used to clamp steel and iron bars with threads without damaging the threads. The ratchet mechanism is used to quickly and efficiently rotate the threaded rods. By MCC made in Japan.
BETEX ALNC cylinders: lightweight aluminum, 50-100 ton capacity, 50-250 mm stroke, 700 bar pressure, locknuts for safety, easy handling, heavy-duty spring, roll-polished interior, corrosion-resistant anodized coating.
Hydraulic single acting BETEX JLLC cylinders offer 50-1000 ton capacity, 50-300 mm stroke, and 700 bar pressure. Features include a safety locknut, piston protection ring, interchangeable saddle, high-flow coupler, and a durable black nitride finish for heavy-duty applications.
BETEX JLPC hydraulic cylinders, high tonnage, compact, feature load return, safety locknut, and blow-out protection. Ideal for confined spaces, these are durable and versatile for industrial applications.
BETEX NDAC hydraulic cylinders: double-acting, 10-100 ton capacity, 150-470 mm stroke, 700 bar max pressure, hard chromed piston, roll-polished rams, black nitride finish, versatile for diverse industrial applications.
BETEX NDAH hydraulic cylinders: double-acting, hollow, 30-100 ton capacity, 76-257 mm stroke, 700 bar max pressure, hard chromed piston, roll-polished rams, black nitride finish, versatile for heavy-duty applications.
BETEX NSHS Series features single-acting hydraulic hollow cylinders with spring return, offering capacities from 12 to 100 tons, strokes of 8-158 mm, hard chromed pistons, and a black nitride finish.
BETEX NSSS single-acting cylinders are robust, reliable, and suitable for a wide range of hydraulic applications. Their design features and high working pressure make them a valuable choice for industries requiring efficient and durable hydraulic systems.
CornerWrench™ is an innovative pipe wrench manufactured by MCC. It revolutionizes traditional pipe wrench design with its 90-degree offset handle and compact ratchet-like action head. Made in Japan.
CW-AL Series, jaws made of high carbon alloy steel with a careful heat treatment provides a long life span with tight grip. I-beam structure for both light weight and strength. By MCC, made in Japan.
Corner wrenches Forged Aluminum Handle CWALAD Series, jaws made of high carbon alloy steel with a careful heat treatment provides a long life span with tight grip. By MCC, made in Japan.
Chain wrenches MT designed to provide leverage for the plumbing work in close quarters. Four sizes are available from 14 to 165mm. Made in Japan.
Guaranteed heavy duty strength with drop forged steel handle. Full floating hook jaw with spring suspension for easy grip and release.
Drop forged Aluminum handle features both heavy duty strength and ultra light weight. Full floating hook jaw with spring suspension for easy grip and release. Special feature for larger diameter capacity. MCC – Made in Japan.
Guaranteed strength as industrial standard. Sturdy ductile cast-iron handle. Full floating hook jaw with spring suspension for instant grip and easy release MCC Japan.
Slim Fit PWTDA Series pipe wrenches by MCC, Made in Japan. 30% thinner than conventional wrenches. Designed for tight spaces. PWTDA300: 12″, Ø49mm. PWTDA350: 14″, Ø61mm. Lightweight, strong, ideal for small areas and short nipples.
Twist drill with long shank and specially ground roof-like tip, which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations. 800 – 2500 rpm, e.g. Ø 10 mm 2500 rpm in formwork panel. Made in Germany
Twist drill with long shank and specially ground roof-like tip which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations
Twist drill with long shank (SDS-plus) and specially ground roof-like tip which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations
“Lewis” pattern, with crest of thread, one main cutting edge and one taper tap. With lug for wooden handle For drilling deep holes in soft wood (depending on the diameter) and also limited in European hard wood
Brad point drill bit with extra long brad point (ground three-edged), two main cutting edges, two taper taps, four grooves on the spiral.
800 – 2500 rpm e.g. Ø 16 mm 2000 rpm in soft wood
FAMAG 1591 is a German-made HSS brad point drill bit designed for precision in woodworking. Ideal for softwood, European hardwood, and MDF, it’s optimized for cordless screwdrivers, ensuring accurate and clean drilling.
TCT brad point drill bit, cylindrical, two main cutting edges, two taper taps. Spiral form N. 4.000 – 10.000 rpm e.g. Ø 5 mm 8.000 rpm in European hard wood. Further details in the speed diagram.
Premium version, fully ground quality with two main cutting edges and two taper taps. Specially ground spiral for a very good chip removal. 2400 – 8000 rpm e.g. Ø 4 mm 5000 rpm in European hard wood. Further details in the speed diagram
One-piece drill bit (C6,3) with brad point, two main cutting edges, two protruding cutting edges and a hexagonal shank for bit holder (1/4“; C 6,3). Maximum rotation speed of the cordless screwdriver: recommended 3000 rpm
Premium quality version, extra long, fully ground quality with two main cutting edges and two taper taps. Internally ground special spiral for very good chip removal
Two straight main cutting edges with chip breaking flutes. With stepped cylindrical shank Ø 13 or 16 mm.
2200 – 4000 rpm. e.g. Ø 16 mm 2200 rpm in soft wood. Further details in the speed diagram
With brad point, two main cutting edges and protruding cutting edges. 1000 – 5000 rpm e.g. Ø 5 mm 5000 rpm in softwood. Further details in the speed diagram
With brad point, two main edges and protruding cutting edges. Chrome Vanadium steel. 1500 – 4000 rpm e.g. Ø 5 mm 4000 rpm in soft wood. Further details in the speed diagram. FAMAG – Germany.
Seven-edged countersink with pointed angle 90°, irregular pitch, with fully ground tool head for finest results. 1000 – 2500 rpm. e.g. Ø 16 mm 1800 rpm in soft wood. Further details in the speed diagram
One-edged countersink with bored hole and countersinking angle of 90°.
600 – 1000 rpm. e.g. Ø 16 mm 800 rpm in soft wood
Twist drill, made of cobalt alloyed HSS, acc. to DIN 338, fully ground from the solid. Fitted with a special spiral for good chip removal and greasing materials. Crosswise sharpened acc. to DIN 1412C, point angle 135°, tolerance of diameter h8
500 – 2500 rpm. e.g. Ø 12 mm 2000 rpm in soft wood. Further details in the speed diagram