Returning Customer ?
Don't have an account ?
Showing 946–990 of 1516 results
For inspecting hard to see locations Round mirror with plastic frame Illumination with an LED (1x CR2016 battery included) Made in Germany
For highest operational demands Inductive hardened cutting blades Cutting blades hardness 61-63 HRC Gunmetal-finish, ground head ELORA-high grade tool steel C45 / 1.0503
Elora 485-BI End Cutter is a robust and reliable tool designed for cutting nails and hardened steel wires. With its strong load-bearing capacity, high cutting edge hardness, and quality handles, it is an excellent choice for professional nail cutting tasks.
Designed for inside hexagon screws, featuring a chrome-plated finish, knurled grip, and high-quality materials. It complies with industry standards, ensuring reliable performance for professionals. Elora Germany.
Tailored for inside hexagon screws, featuring an extended length for deep or hard-to-reach fasteners. Its chrome-plated, polished finish enhances durability and corrosion resistance, while the knurled grip ensures comfortable handling.
The V-Block Pair with Clamps, made from hardened special or stainless steel, includes two 90° V-cuts with finely ground surfaces and angularly ground front faces, adjusted in pairs for precise clamping and marking of cylindrical pieces.
Rubberized head-lamp with reduced glare. Integrated lanyard hole on the lamp stem. Illumination range 100 Meter. Duration of burning appr. 4 hrs. Waterproof up to 3 Meter.
• stainless steel guideway • with handwheel for quick adjustment and fine adjustment • LCD display with clear reading, reading mm / inch switchable • On/Off switch, zero-setting at any position • Preset-function, max. sliding speed 1.5 m/sec
Weigh: 345 g Dimension: 120 × 100 × 60 mm In black yellow plastic box with belt clip and suspension hole TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA Made in Germany
Suitable for inside TORX® screws resp. inside TORX® safety screws In black metal storage case with plastic insert Square drive according to DIN 3120, ISO 1174, with ball retaining groove Operation tools according to DIN 3122, ISO 3315 TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
Screw extractors are useful tools for extracting broken or stripped fasteners, allowing you to salvage the material and replace the damaged screw or bolt.
Length of cutting edges: 40 – 90mm For long straight cuts Adjustable, bolted joint High grade tool steel, forged Trap protection
The ELORA 131BI-240 water pump pliers are manufactured according to DIN ISO 8976, Form B standards, ensuring excellent quality and performance in every application.
– teeth inductive hardened, trap protection – BI:nonslip QUATROLIT®-2C-handles – chrome-plated, polished jaws – ELORA-Chrome-Vanadium 31 CrV3 / 1.2208 – according to DIN ISO 8976, Form C
For thin-walled bendable steel pipes or copper pipes With plastic handle protectors Made in Germany
Water Pump Plier WPS-250: Multi-purpose tool made in Japan by MCC. Adjustable, durable, with 9-stage jaw adjustment. Suitable for piping work, tightening bolts, and equipped with a screwdriver. Long handle for increased leverage.
for Western plugs, offers cutting and stripping functions, high crimping quality with a self-releasing lock, and additional features for round wires, with hardened, yellow plastic handles and durable Chrome-Vanadium steel.
• with vernier reading • for measurements of flat welding seams and in corners etc. • stainless steel hardened and fine ground • scale matt chromed • with fixing screw
a lightweight powerhouse with 1350 Nm of torque, precise control, and efficient exhaust design. Ideal for heavy-duty tasks, it offers reversible operation, 3-step torque regulation, and high-performance twin-hammer mechanism.
Elora Germany’s 5001 Pneumatic Impact Wrench in 3/4″ is a lightweight powerhouse delivering 1900 Nm of torque. It features a vibration-damped housing, 3-step torque control, and clockwise/counter-clockwise regulation. Ideal for heavy-duty tasks, it operates at 6.3 bar with a max sound level of 95 dB(A).
Elora Germany’s 5003 Pneumatic Impact Wrench Mini is a compact yet powerful tool with 450 Nm of torque. It’s ideal for tight spaces, offers precise control, and features a vibration-damped composite housing.
Elora Germany’s 5003 Pneumatic Impact Wrench Mini is a compact yet powerful tool with 450 Nm of torque.The wrench has reversible operation, efficient exhaust management, and a 3-step torque regulation system. With a high-performance twin-hammer mechanism and 1/4” air inlet, it’s suitable for various tasks while maintaining user comfort and safety.
Elora Germany’s Pneumatic Ratchet Wrench 1/4” Mini 5011 excels with its lightweight design, reversible ratchet head, ergonomic grip, and impressive 35 Nm torque. Ideal for confined spaces, it ensures efficient and precise work.
Snipe nose plier with side cutter, straight pattern Heavy duty side cutter Engineer’s plier, German pattern Screwdriver, plain slotted Screwdriver, cross slotted
For plain slotted screws Dull chrome plated blade with additionally coated blade tip 2 component grip, revolving end-cap, non-slip micro-surface Blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381 Made in Germany
For plain slotted screws For work with electrostatic endangered components Blade through hardened and chrome-plated, tip gunmetal finish Blade made of high quality ELORA-Chrome-Vanadium Molybdenum steel Made in Germany
For cross slotted screws For work with electrostatic endangered components Blade through hardened and chrome-plated, tip gunmetal-finish Blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel Made in Germany
The Electr. Digital Anemometer 0.3 ~ 30 m/s is a state-of-the-art device designed to cater to a wide range of professionals and outdoor enthusiasts. With its exceptional capabilities and robust features, it is the go-to solution for measuring wind speed in various units and under diverse conditions.
The Electr. Digital Anemometer 0.3 ~ 45 m/s is a state-of-the-art device designed to cater to a wide range of professionals and outdoor enthusiasts. With its exceptional capabilities and robust features, it is the go-to solution for measuring wind speed in various units and under diverse conditions.
For scaffolding and constructional steel work. Reversible ratchets with two different sizes, with centering tips. With lock hole Ø 5,2 mm. Smallest possible swivel angle 11,25°. Chrome-plated. Chrome-Vanadium 31CrV3 / 1.2208
INM=12 pcs., INA=9 pcs. In black metal storage case with plastic insert Chrome-plated, polished Knurled According to DIN 7422
Features 16 pcs for 3/4″ drives, including flexible handles, sliding T-bars, extension bars, universal joints, and reversible ratchets in metric and imperial sizes, housed in a metal case. Made in Germany.
Reversible Ratchet 1/2″ 770-L1F is a compact and durable tool with a slim head, forged gear wheel for safety, and quick release button. It offers precise control with a minimal swivel angle, a comfortable nonslip handle, and meets industry standards for reliability and compatibility. Elora Germany.
Reversible Ratchet 1/2″ ELORA 770-L1K is a precision tool with a fine-tooth mechanism and a slim head for accurate and controlled movement in tight spaces. It features a forged gear wheel with safety locking, a quick release button, and an ultra-small swivel angle of 5°. Elora Germany.
Offers 34-35 pcs in metric/imperial sizes, including reversible and push-through ratchets, extension bars, a universal joint, and socket converters. Made in Germany for professional use.
Including essential components and sockets in metric or imperial sizes, are made of high-quality Chrome-Vanadium steel, designed for professional use, and come in a durable metal case. Made in Germany.
The ELORA 780-10 socket sets, in variants 780-10M (metric) and 780-10A (AF), include reversible ratchets, bi-hexagon sockets, sliding T-bars, and extension bars, housed in a black metal case, each weighing 33800g. Made in Germany.
For power tools In black metal storage case with OMS-hard foam insert Square according to DIN 3121, form F and G, ISO1174 Tools made of special steel, phosphated Made in Germany
In black metal storage case with OMS-hard foam insert Square drive according to DIN 3120, ISO 1174 Operation tools according to DIN 3122, ISO 3315 Made in Germany
For inside and outside TORX® screws, featuring 1/4″ square drive sockets and screwdriver sockets in various sizes. It comes in a black metal case with OMS-hard foam insert for organized storage and transport.
in either metric or inch sizes, comes with a variety of accessories compatible with a 1/4 inch square drive, housed in a grease-resistant metal case, and meets the DIN 3122 and ISO 3315 standards, made in Germany.
Suitable for inside- and outside TORX® screws resp. inside TORX® safety screws In black metal storage case with OMS-hard foam insert Square drive according to DIN 3120, ISO 1174 Operation tools according to DIN 3122, ISO 3315 TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
Suitable for inside TORX® screws resp. inside TORX® safety screws In black metal storage case with plastic insert Square drive according to DIN 3120, ISO 1174 Operation tools according to DIN 3122, ISO 3315 TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
MU=30 pcs, AU=31 pcs In black metal storage case with OMS-hard foam insert Square drive according to DIN 3120, ISO 1174 Operation tools according to DIN 3122, ISO 3315 Made in Germany
