Returning Customer ?
Don't have an account ?
Showing 46–90 of 123 results
Universal, super handy electric tool with automatic circuit control for producing pipe pressing joints for all common press fitting systems. For battery and corded operation. REMS – Made in Germany.
REMS Curvo – wrinkle-free bending. Universal for many pipes and tubes. Instant use without setting. Fast and creep speed operation for precise bending. Quick change of bending and back formers.
REMS Universal diamond cutting disc LS H-P Ø 180 mm for Krokodil Electric diamond chasing and cutting grinder for chasing and cutting concrete, steel-reinforced concrete, all kinds of masonry, natural stone, all kinds of screed.
REMS Universal diamond cutting disc LS-Turbo Ø 180 mm. Laser-welded, high temperature-resistant for fast cuts and cuts in very hard materials, with metal body in accordance with EN 13236. Made in Germany.
REMS Push. Hand pressure testing pump with pressure gauge, p ≤ 6 MPa/60 bar/870 psi, for pressure and tightness testing of piping systems and receptacles up to 6 MPa/60 bar/870 psi, Corrosion-resistant, powder-coated 12 ltr steel tank. 1.5 m high-pressure hose with ½”-connection. In a carton
For power drills 43 mm. For drill bits Ø 8, 10, 12, 14, 16, 18, 20, 22, 24, 26 mm. Version with two solid guide rods. Tool holder and foot made of cast aluminium. Springs and guide posts made of stainless steel.
For power drills 43 mm. Packing unit = 1, in carton. Tool holder and foot made of cast aluminium, guide posts made of stainless steel Made in Germany.
Due to the pivoting fixture also applicable for curved cheeks. For staircase > 45° please use a shim. Packing unit = carton.
Rapid drilling in soft wood, European hard wood, chipboard, MDF etc. Rapid chipping of solid wood and chipboards. Clearly less effort is needed and boring is more rapid than with the usual Forstner bit
The FAMAG 1623 Forstner bit (BORMAX 2.0) is a long version for woodworking. It features grooved cutting edges, low heat development, and rapid drilling in various wood materials. Suitable for freehand and stationary use. Made in Germany.
The pilot-drill bit is ideal for drilling at an angle which is not 90° in workpieces surface, which occurs for example in the construction of staircase. Can be used with the centre point as traditional Bormax
Bormax® 2.0 prima with exchangeable pre-drill bit, centre drill bit or guiding pin. Much less feed force needed as well as minimized friction and therefore less heat generation. Reasons: The two main cutting edges are grooved shifted, as well as the toothed linear grooved pre-cutters. A matching centre drill bit and an allen wrench are included in the delivery. Hexagonal shank for a better power transfer
1664 cylindrical boring bit is a high-quality and versatile tool for precise drilling in wood and plastics. It features carbide-tipped cutting edges for durability and can handle hard and coated materials. The package includes an exchangeable center point, a 4mm pre-drill bit, and an allen key. Suitable for deep hole drilling with extension shanks.
The first carbide tipped Forstner bit with centre point, carbide-tipped main cutting edge and toothed circumferential cutter. Hexagonal shank for a better power transfer
It features carbide tips, two cutting edges, and two spurs. Precisely ground with a diamond wheel, it provides tear-free, accurate drillings in hard wood, chipboards, and plastics. It offers an effortless drilling experience and is recommended for stationary use.
600 – 6000 rpm. e.g. Ø 68 mm 1300 rpm in European hard wood. Further details in the speed diagram
Traditional Forstner bit with centre point, two main cutting edges and two circumferential cutters. Low friction due to the reduced peripheral cutting edge
Traditional cylinder boring bit with centre point, two main cutting edges and two taper taps. 700 – 3000 rpm. e.g. Ø 15 mm 2300 rpm in soft wood. Further details in the speed diagram
Twofold ground main cutting edges and circumferential cutters. Effective length of the plug max. 70 mm
Place 1616 at the edge of the work piece in a way that the outside of the cutter is overlapping the edge, allowing fast chip ejection
“Lewis” pattern, crest of thread, main cutting edge and taper tap in premium quality. Version with stepped head and hexagonal shank from Ø 8mm.
500 – 2800 rpm. e.g. Ø 12 mm 2000 rpm in soft wood. Further details in the speed diagram
500 – 800 rpm e.g. Ø 40 mm 800 rpm in soft wood. Further details in the speed diagram Made in Germany
2800 – 3600 rpm e.g. Ø 18 mm 2800 rpm in glulam (glue laminated timber, on joinery machines) Made in Germany
“Lewis” pattern with crest of thread, main cutting edge and taper tap, morse cone shank No. 2
1250 – 2500 rpm e.g. Ø 22 mm 1500 rpm in soft wood. Further details in the speed diagram
Specially formed channel for removing chips, teflon-coated, changeable crest of thread HSS, two carbide tipped main cutting edges, protruding cutting edges and cylindrical shank with three clamping surfaces. Ground by diamond wheels on CNC-machines
“Lewis” pattern with crest of thread, main cutting edge and bottom blade. 700 – 2250 rpm e.g. Ø 12 mm 1500 rpm in European hard wood. Further details in the speed diagram
powerful 2000W electric soldering tool for professional use, featuring a 4m cable, fast heating to 900°C, and versatility with prisma and rod electrodes. Ideal for soft soldering copper tubes in trade, industry, and on-site work.
Automatic internal clamping chuck for threading short pipe pieces up to 4″. Quick, tool-free operation, efficient production, internal clamping mechanism, durable clamping. REMS – Made in Germany.
Nippelspanner is a manual pipe nipple chuck designed for internal clamping of short pipe pieces. Compatible with various threading machines, it saves time and money by utilizing short pipes efficiently. REMS – Germany.
for mains operation instead of battery Li-Ion 21.6 V
Twist drill with long shank and specially ground roof-like tip, which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations. 800 – 2500 rpm, e.g. Ø 10 mm 2500 rpm in formwork panel. Made in Germany
Twist drill with long shank and specially ground roof-like tip which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations
Twist drill with long shank (SDS-plus) and specially ground roof-like tip which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations
“Lewis” pattern, with crest of thread, one main cutting edge and one taper tap. With lug for wooden handle For drilling deep holes in soft wood (depending on the diameter) and also limited in European hard wood
Brad point drill bit with extra long brad point (ground three-edged), two main cutting edges, two taper taps, four grooves on the spiral.
800 – 2500 rpm e.g. Ø 16 mm 2000 rpm in soft wood