Returning Customer ?
Don't have an account ?
Showing 811–855 of 1537 results
Spanner with 02 sizes open, non-sparking, according to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Material Cu-Be. Made by ELORA Germany. Other size upon on request.
measure crankshaft deflections and align bearings during engine assembly. Suitable for ship and car engines, and compressors, the kit includes a dial indicator (0.01 mm resolution, 40 mm housing), extension rods, and a protective case. Measuring range: 60-500 mm.
Hand bit holder features a permanent magnet bit lock, nonslip QUATROLIT®-2C-handle, suspension hole, and is made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208 steel. It has a 1/4″ female hexagon drive according to DIN 3126 D 6.3 DIN ISO 1173.
Features like the safety release trigger and spindle lock facilitate easy usage and disc changes, accommodating Ø 125 mm grinding discs. It operates at a max speed of 11000 rpm, promising efficiency and precision for all grinding tasks.
Đầu vuông: 1/2 inch Tổng chiều dài: 295 mm. Trọng lượng: 460 g. Vật liệu: ELORA-Chrome-Vanadium 31CrV3/ 1.2208. Sản xuất tại Đức.
– 6-pcs. – in plastic folding box – for countersinking and deburring – with cylindrical shaft and 3 flutes – DIN 335 C
For power drills 43 mm. For drill bits Ø 8, 10, 12, 14, 16, 18, 20, 22, 24, 26 mm. Version with two solid guide rods. Tool holder and foot made of cast aluminium. Springs and guide posts made of stainless steel.
For power drills 43 mm. Packing unit = 1, in carton. Tool holder and foot made of cast aluminium, guide posts made of stainless steel Made in Germany.
Due to the pivoting fixture also applicable for curved cheeks. For staircase > 45° please use a shim. Packing unit = carton.
Length of cutting edges: 42 mm For short, straight and figure cuts, small radius Adjustable, bolted joint Black handles, PVC dip coated, trap protection, opening spring High grade tool steel, forged
Head-Length: 90 – 140mm Length: 320 – 380mm With 2 flat faces and ash handle According to DIN 5128-90, 90 Shore A Spare heads on request
Rapid drilling in soft wood, European hard wood, chipboard, MDF etc. Rapid chipping of solid wood and chipboards. Clearly less effort is needed and boring is more rapid than with the usual Forstner bit
The FAMAG 1623 Forstner bit (BORMAX 2.0) is a long version for woodworking. It features grooved cutting edges, low heat development, and rapid drilling in various wood materials. Suitable for freehand and stationary use. Made in Germany.
The pilot-drill bit is ideal for drilling at an angle which is not 90° in workpieces surface, which occurs for example in the construction of staircase. Can be used with the centre point as traditional Bormax
Bormax® 2.0 prima with exchangeable pre-drill bit, centre drill bit or guiding pin. Much less feed force needed as well as minimized friction and therefore less heat generation. Reasons: The two main cutting edges are grooved shifted, as well as the toothed linear grooved pre-cutters. A matching centre drill bit and an allen wrench are included in the delivery. Hexagonal shank for a better power transfer
1664 cylindrical boring bit is a high-quality and versatile tool for precise drilling in wood and plastics. It features carbide-tipped cutting edges for durability and can handle hard and coated materials. The package includes an exchangeable center point, a 4mm pre-drill bit, and an allen key. Suitable for deep hole drilling with extension shanks.
The first carbide tipped Forstner bit with centre point, carbide-tipped main cutting edge and toothed circumferential cutter. Hexagonal shank for a better power transfer
It features carbide tips, two cutting edges, and two spurs. Precisely ground with a diamond wheel, it provides tear-free, accurate drillings in hard wood, chipboards, and plastics. It offers an effortless drilling experience and is recommended for stationary use.
600 – 6000 rpm. e.g. Ø 68 mm 1300 rpm in European hard wood. Further details in the speed diagram
Traditional Forstner bit with centre point, two main cutting edges and two circumferential cutters. Low friction due to the reduced peripheral cutting edge
Traditional cylinder boring bit with centre point, two main cutting edges and two taper taps. 700 – 3000 rpm. e.g. Ø 15 mm 2300 rpm in soft wood. Further details in the speed diagram
Twofold ground main cutting edges and circumferential cutters. Effective length of the plug max. 70 mm
Place 1616 at the edge of the work piece in a way that the outside of the cutter is overlapping the edge, allowing fast chip ejection
“Lewis” pattern, crest of thread, main cutting edge and taper tap in premium quality. Version with stepped head and hexagonal shank from Ø 8mm.
500 – 2800 rpm. e.g. Ø 12 mm 2000 rpm in soft wood. Further details in the speed diagram
500 – 800 rpm e.g. Ø 40 mm 800 rpm in soft wood. Further details in the speed diagram Made in Germany
2800 – 3600 rpm e.g. Ø 18 mm 2800 rpm in glulam (glue laminated timber, on joinery machines) Made in Germany
“Lewis” pattern with crest of thread, main cutting edge and taper tap, morse cone shank No. 2
1250 – 2500 rpm e.g. Ø 22 mm 1500 rpm in soft wood. Further details in the speed diagram
Specially formed channel for removing chips, teflon-coated, changeable crest of thread HSS, two carbide tipped main cutting edges, protruding cutting edges and cylindrical shank with three clamping surfaces. Ground by diamond wheels on CNC-machines
“Lewis” pattern with crest of thread, main cutting edge and bottom blade. 700 – 2250 rpm e.g. Ø 12 mm 1500 rpm in European hard wood. Further details in the speed diagram
With straight edge and point working end hardened Material: high grade tool steel C45 / 1.0503. ELORA Germany.
• for measuring of external grooves, bars and flats etc. • water proof • tungsten carbide measuring contact points • with moveable arm, with tolerance fingers • zero setting by rotating the knurled outer ring • incl. operation manual
for measuring the thickness of leather, paper, felt, rubber etc. • frame made of light metal, hammer blow lacquered • measuring faces hardened, ground and lapped • spindle and probe made of stainless steel
• very helpful for measurements on hot materials or electronic parts because of ceramic measuring surfaces etc. • sturdy light metal frame, lacquered, with spindle lifting lever • ceramic measuring surfces, non conducting
• rugged metal housing, weighing plate made from stainless steel • large LCD display, digit height 20 mm • easy 3-/4-button operation, self-explaining • operation by battery or main supply, switchable
With data output Opto RS232. Spray water resistant acc. to DIN 40050 / IEC 60529. Base plate and rulers stainless, hardened. Robust ABS plastic housing, multi-functional display. VOGEL Germany.
The V-Block with Clamp, made of hardened, finely ground steel, features two 90° V-cuts and supporting surfaces. Available in single or paired units, it offers precise clamping for cylindrical pieces with diameters of 5-25 mm.
• for standard workshop purposes • guide bar made of special steel • reading parts matt chrome finish, with fine adjustement • at zero-position the scriber coincides exactly with the base
– 9 pcs. – in black plastic box with transparent cover – magnetic bit holder ELORA-No. 4150-50, with male hexagonal drive according to DIN 3126 E 6,3 – bits made of ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – 8 bits with male hexagon drive according to DIN 3126 C 6,3
Professional mini-format spirit level with tough rectangular aluminium core housing and two precision-milled measuring surfaces with V-groove for horizontal and vertical measurements.
Especially suitable for all measuring tasks in cramped conditions. Compact design – can always be carried with you. Coated measuring surface protects delicate surfaces. Spirit level Type 70T with 2 vials. STABILA – Made in Germany.
