Returning Customer ?
Don't have an account ?
Showing all 25 results
One-piece drill bit (C6,3) with brad point, two main cutting edges, two protruding cutting edges and a hexagonal shank for bit holder (1/4“; C 6,3). Maximum rotation speed of the cordless screwdriver: recommended 3000 rpm
“Lewis” pattern, crest of thread, main cutting edge and taper tap in premium quality. Version with stepped head and hexagonal shank from Ø 8mm.
500 – 2800 rpm. e.g. Ø 12 mm 2000 rpm in soft wood. Further details in the speed diagram
2800 – 3600 rpm e.g. Ø 18 mm 2800 rpm in glulam (glue laminated timber, on joinery machines) Made in Germany
Specially formed channel for removing chips, teflon-coated, changeable crest of thread HSS, two carbide tipped main cutting edges, protruding cutting edges and cylindrical shank with three clamping surfaces. Ground by diamond wheels on CNC-machines
FAMAG 1591 is a German-made HSS brad point drill bit designed for precision in woodworking. Ideal for softwood, European hardwood, and MDF, it’s optimized for cordless screwdrivers, ensuring accurate and clean drilling.
The FAMAG 1623 Forstner bit (BORMAX 2.0) is a long version for woodworking. It features grooved cutting edges, low heat development, and rapid drilling in various wood materials. Suitable for freehand and stationary use. Made in Germany.
Traditional cylinder boring bit with centre point, two main cutting edges and two taper taps. 700 – 3000 rpm. e.g. Ø 15 mm 2300 rpm in soft wood. Further details in the speed diagram
The first carbide tipped Forstner bit with centre point, carbide-tipped main cutting edge and toothed circumferential cutter. Hexagonal shank for a better power transfer
Traditional Forstner bit with centre point, two main cutting edges and two circumferential cutters. Low friction due to the reduced peripheral cutting edge
“Lewis” pattern with crest of thread, main cutting edge and bottom blade. 700 – 2250 rpm e.g. Ø 12 mm 1500 rpm in European hard wood. Further details in the speed diagram
With brad point, two main cutting edges and protruding cutting edges. 1000 – 5000 rpm e.g. Ø 5 mm 5000 rpm in softwood. Further details in the speed diagram
Twist drill with long shank (SDS-plus) and specially ground roof-like tip which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations
Rapid drilling in soft wood, European hard wood, chipboard, MDF etc. Rapid chipping of solid wood and chipboards. Clearly less effort is needed and boring is more rapid than with the usual Forstner bit
1664 cylindrical boring bit is a high-quality and versatile tool for precise drilling in wood and plastics. It features carbide-tipped cutting edges for durability and can handle hard and coated materials. The package includes an exchangeable center point, a 4mm pre-drill bit, and an allen key. Suitable for deep hole drilling with extension shanks.
Brad point drill bit with extra long brad point (ground three-edged), two main cutting edges, two taper taps, four grooves on the spiral.
800 – 2500 rpm e.g. Ø 16 mm 2000 rpm in soft wood
One-piece twist drill bit, fully ground from the solid, long version with hexagonal shank for bit holder (1/4“; E 6,3), polished section of the surface of the cone 118°, blank ground
One-piece twist drill bit, fully ground from the solid, short version with hexagonal shank for bit holder (1/4“; C 6,3), polished section of the surface of the cone 118°, blank ground
Twist drill with long shank and specially ground roof-like tip, which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations. 800 – 2500 rpm, e.g. Ø 10 mm 2500 rpm in formwork panel. Made in Germany
Premium quality version, extra long, fully ground quality with two main cutting edges and two taper taps. Internally ground special spiral for very good chip removal
The pilot-drill bit is ideal for drilling at an angle which is not 90° in workpieces surface, which occurs for example in the construction of staircase. Can be used with the centre point as traditional Bormax
Bormax® 2.0 prima with exchangeable pre-drill bit, centre drill bit or guiding pin. Much less feed force needed as well as minimized friction and therefore less heat generation. Reasons: The two main cutting edges are grooved shifted, as well as the toothed linear grooved pre-cutters. A matching centre drill bit and an allen wrench are included in the delivery. Hexagonal shank for a better power transfer
Premium version, fully ground quality with two main cutting edges and two taper taps. Specially ground spiral for a very good chip removal. 2400 – 8000 rpm e.g. Ø 4 mm 5000 rpm in European hard wood. Further details in the speed diagram
TCT brad point drill bit, cylindrical, two main cutting edges, two taper taps. Spiral form N. 4.000 – 10.000 rpm e.g. Ø 5 mm 8.000 rpm in European hard wood. Further details in the speed diagram.
600 – 6000 rpm. e.g. Ø 68 mm 1300 rpm in European hard wood. Further details in the speed diagram