Returning Customer ?
Don't have an account ?
Showing all 24 results
FELCO 200C-60 loppers feature 60 cm length, straight cutting head, carbon fiber and forged aluminum handles, ultra-sharp replaceable blade, ergonomic grips, rubber shock absorbers, adjustable cutting head, and Swiss-made quality.
Twofold ground main cutting edges and circumferential cutters. Effective length of the plug max. 70 mm
Place 1616 at the edge of the work piece in a way that the outside of the cutter is overlapping the edge, allowing fast chip ejection
“Lewis” pattern, crest of thread, main cutting edge and taper tap in premium quality. Version with stepped head and hexagonal shank from Ø 8mm.
500 – 2800 rpm. e.g. Ø 12 mm 2000 rpm in soft wood. Further details in the speed diagram
For power drills 43 mm. For drill bits Ø 8, 10, 12, 14, 16, 18, 20, 22, 24, 26 mm. Version with two solid guide rods. Tool holder and foot made of cast aluminium. Springs and guide posts made of stainless steel.
The pilot-drill bit is ideal for drilling at an angle which is not 90° in workpieces surface, which occurs for example in the construction of staircase. Can be used with the centre point as traditional Bormax
Bormax® 2.0 prima with exchangeable pre-drill bit, centre drill bit or guiding pin. Much less feed force needed as well as minimized friction and therefore less heat generation. Reasons: The two main cutting edges are grooved shifted, as well as the toothed linear grooved pre-cutters. A matching centre drill bit and an allen wrench are included in the delivery. Hexagonal shank for a better power transfer
Twist drill with long shank (SDS-plus) and specially ground roof-like tip which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations
One-piece drill bit (C6,3) with brad point, two main cutting edges, two protruding cutting edges and a hexagonal shank for bit holder (1/4“; C 6,3). Maximum rotation speed of the cordless screwdriver: recommended 3000 rpm
With brad point, two main edges and protruding cutting edges. Chrome Vanadium steel. 1500 – 4000 rpm e.g. Ø 5 mm 4000 rpm in soft wood. Further details in the speed diagram. FAMAG – Germany.
The FELCO 20 loppers are compact, durable and powerful to easily handle all types of pruning jobs. Their strength and cutting power come from a compact heavy-duty design made of forged aluminium and a powerful lever arm. The straight cutting head allows for precision pruning and power cutting as the toothed counter blade grips branches while the hardened steel blade cuts cleanly through diameters up to 35 mm / 1.38 inches.
FAMAG 1591 is a German-made HSS brad point drill bit designed for precision in woodworking. Ideal for softwood, European hardwood, and MDF, it’s optimized for cordless screwdrivers, ensuring accurate and clean drilling.
Premium version, fully ground quality with two main cutting edges and two taper taps. Specially ground spiral for a very good chip removal. 2400 – 8000 rpm e.g. Ø 4 mm 5000 rpm in European hard wood. Further details in the speed diagram
The first carbide tipped Forstner bit with centre point, carbide-tipped main cutting edge and toothed circumferential cutter. Hexagonal shank for a better power transfer
Never judge a FELCO tool by its size. This is a small, lightweight, easily transported lopper that thinks and acts big, without ever sacrificing FELCO’s trademark precision – here enhanced by the option of interchangeable handles. The FELCO 200A lopper dispels any considerations of size you might have as quickly and easily cuts through a 35mm / 1.18 inch branch.
With brad point, two main cutting edges and protruding cutting edges. 1000 – 5000 rpm e.g. Ø 5 mm 5000 rpm in softwood. Further details in the speed diagram
If, for whatever reason, you feel that using a FELCO two hand tool is beyond your physical capabilities then the lightweight FELCO 220 lopper is your ideal entry point into the world of larger diameter pruning. This lopper has an innovative gearing system which acts as a force multiplier. However, all you really need to know is that this makes cutting almost effortless; which also makes this pair the perfect choice to cut large diameter (40mm / 1.57 inches) branches from the ground or at height.
1664 cylindrical boring bit is a high-quality and versatile tool for precise drilling in wood and plastics. It features carbide-tipped cutting edges for durability and can handle hard and coated materials. The package includes an exchangeable center point, a 4mm pre-drill bit, and an allen key. Suitable for deep hole drilling with extension shanks.
Due to the pivoting fixture also applicable for curved cheeks. For staircase > 45° please use a shim. Packing unit = carton.
Premium quality version, extra long, fully ground quality with two main cutting edges and two taper taps. Internally ground special spiral for very good chip removal
Seven-edged countersink with pointed angle 90°, irregular pitch, with fully ground tool head for finest results. 1000 – 2500 rpm. e.g. Ø 16 mm 1800 rpm in soft wood. Further details in the speed diagram
Twist drill, made of cobalt alloyd HSS-G, acc. to DIN 338, fully ground from the solid. Fitted with a special spiral for good chip removal and greasing materials. Crosswise sharpened acc. to DIN 1412C, point angle 135°
“Lewis” pattern, with crest of thread, one main cutting edge and one taper tap. With lug for wooden handle For drilling deep holes in soft wood (depending on the diameter) and also limited in European hard wood
500 – 2500 rpm. e.g. Ø 12 mm 2000 rpm in soft wood. Further details in the speed diagram
TCT brad point drill bit, cylindrical, two main cutting edges, two taper taps. Spiral form N. 4.000 – 10.000 rpm e.g. Ø 5 mm 8.000 rpm in European hard wood. Further details in the speed diagram.