Returning Customer ?
Don't have an account ?
Showing 181–225 of 256 results
• solid or ribbed construction • special wear resistant steel casting • surfaces and four sides fine planed • against extra charge the plates can be supplied also with bores, holes or T-slots
• solid angular steel construction, powder coated, grey (RAL 7001) • 3-point support M 24 x 80 mm • 2 extra support for tipping protection, with adjusting screws • single packed on an Euro-pallet
• especially for maintenance and service tasks for lifts • special set for lift and wire/cable measurement • with LCD display for optical or mechanical speed detection
• for checking and transferring angles • large LCD display with clear reading, digit height 10 mm • blades in anodized aluminium with profile grooves, and embedded magnet strips • On/Off button and data hold function, with fixing screw • 180° rotating display, by pressing function button
• top quality, for calibration purpose • stainless, hardened and fine ground • scales matt chrome finish • parallaxfree reading by vernier, with large magnifying lens • with fine adjustment
Universal Bevel Protractor Set offers a reliable and precise solution for measuring angles. With its three blades of different lengths, stainless steel construction, fine adjustment capability, and parallax-free reading.
Screw pitch gauges measure thread pitch, offering diverse models for metric, Whitworth, and American standard threads (UNC, UNF, SAE). Each gauge has specific blades and ranges, essential for mechanical engineering and manufacturing applications.
• for testing of raised and recessed curves • concave and convex shaped blades • fine cutted forms
• matt chrome finish • for testing of raised and recessed curves • concave and convex shaped blades • each blade with 5 measuring points
• with data output RS 232 C • stainless steel, hardened and ground • LCD display with clear reading, zero-setting at any position • On/Off button, reading switchable mm/inch
• for adjusting, levelling etc. • rolled in a rugged plastic box or as stripes in a case with 10 or 5 blades • different material in different width and different length available
Numbering up to 500 mm lenght with continuing mm numbering. The rules from 1000 mm up to 2000 mm lenght with continuing cm numbering. The rules according to EC Class I and are qualified as reference pieces.
Type A = mm / mm top and bottom 1/1 mm graduation • reading from left to right • semi rigid version, with wide cross section • stainless spring steel, with non glare, matt surface • precise, deep graduation with laser engraved, continuing numbers • with identification-no. and calibration certificate
Type B = ½ mm / mm top ½ mm and bottom 1/1 mm graduation • reading from left to right • semi rigid version, with wide cross section • stainless spring steel, with non glare, matt surface • precise, deep graduation with laser engraved, continuing numbers • with identification-no. and calibration certificate
acc. to DIN 2014/32/EU • reading from left to right or right to left • precise, deep graduation laser engraved, continuing numbers • non glare, matt surface • stainless spring steel • with identification-no
acc. to workshop grade • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • graduation reading from left to right, zero-point in the middle • top and bottom 1/1 mm graduation
• reading from left to right • semi rigid version, with wide cross section • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • up to 2000 mm in a vinyl bag
type B = ½ mm / mm top ½ mm and bottom 1/1 mm graduation reading from right to left • semi rigid version, with wide cross section • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • up to 2000 mm in a vinyl bag
Type D = inch / mm top 1/64 ; 1/32 and 1/16 inch graduation, bottom ½ mm and 1/1 mm • semi rigid version, with wide cross section • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • up to 2000 mm in a vinyl bag
• reading from left to right • graduation on front- and rearside • stainless spring steel • non glare, matt surface • laser engraved scale for a clear reading front top ½ mm and bottom 1/1 mm graduation back top 1/16; 1/32; 1/64 inch – bottom 1/10; 1/20; 1/50; 1/100 inch
• graduation on front- and rearside • reading from left to right • precise, deep laser engraved scale • non-glare, matt surface, with clear reading • carbon spring steel, with black anodized surface
• graduation on front- and rearside • reading from left to right • with two straight ends without whole • precise, deep laser engraved scale • non-glare, matt surface, with clear reading • with detachable magnetic inserts • non-glare, matt surface
• flexible design because of narrow cross section • stainless spring steel – non glare, matt surface • front: top 1/1 mm and bottom 1/1 mm graduation • back: top ½ mm and bottom ½ mm graduation • etched graduation for a clear reading – cm graduation
• reading from left to right • with conversion table on the backside • etched graduation for a clear reading • non glare, matt surface • stainless spring steel
designed for precision across uneven surfaces. Extending from 183 to 315 cm, it features a robust aluminum profile, eccentric clamps for stability, and slip-on spacers for accurate measurements. Stabila – Germany.
Ultra-rigid aluminum, patented impact protection for precision. Features include precision-milled surfaces, easy-to-clean coating, eye-level readability, reinforcing ribs for stability, and shock-absorbing end caps. Ideal for bricklaying.
Especially suitable for taking exact measurements in carpentry and joinery and in kitchen and stair installation. Ideal for architects to check completed work, e. g. for checking the slope of a balcony
Steel, polished Square legs, with hardened tips
• steel, polished • square legs, with hardened tips • with rivet
For standard purposes, like thickness measuring between narrow slots and for automotive and engine industry. Hardened spring steel, conical shaped blades, 100mm lenght.
• stainless steel made • blades made from stainless steel, hard rolled out • conical shaped blades, 100 mm length • nickel plated case with lock nut • sizes in mm and inch on each blade
• anti-magnetic gauge, for electronical services • blades made from brass • conical shaped blades, 100 mm length • brass case with lock nut • sizes in mm on each blade
• high tolerance accuracy for precise measurements • hardened spring steel, conical shaped blades, 100 mm length • nickel plated case, riveted • sizes in mm on each blade • thickness tolerance in relation to the metric sizes
• for adjusting the valves • blades made from hardened spring steel • cylindrical shaped blades, 75 mm length, 9 mm width • fixed by a brass rivet • sizes in mm and inch on each blade • delivery bulk packed or in foil
It’s made of high-quality carbon steel with a 13mm width, is designed for precise gap measurements. It features rounded tips for safety and comes in various blade lengths and quantities, stored in a nylon bag for optimal condition.
• on a metal ring • for adjusting the valves at narrow spaces and to reach difficult positions, etc. • blades made from stainless steel, hard rolled out • cylindrical shaped blades, 13 mm width
• protected housing made of sturdy ABS-plastic, dustproof and spray water resistant • LCD display with clear reading • voltage up to 600 V, current AC/DC up to 600 A
Housing is made of tough, demage-resistant ABS-plastic, dustproof and spray water resistant. Large LCD display clear reading, digit height 19 mm, current DC and AC up to 20 A. Made in Germany.
Measuring range: 40-80 / 50-100 / 60-110 / 80-130 dBA / dBC Resolution: 0.1 dB Max. total accuracy: +- 1.5 dB Linearity range: 50 dB Dimension: 220 mm x 80 mm x 35 mm
Stabila Germany’s Type 70 spirit levels, renowned for their 0.029-degree accuracy, are indispensable for carpentry, furniture manufacturing, and civil construction, ensuring precise alignment and reliable results.
The Stabila 70-2 spirit level offers exceptional accuracy (±0.029°) with its three vials. It has a robust aluminum alloy frame, electrostatic paint for dirt resistance, and hard plastic beveled end caps. Includes a 10-year warranty
70M spirit level, with its rare-earth magnetic base and two precision vials, offers ±0.029 degrees accuracy. Constructed from durable aluminum and coated with electrostatic paint, it’s ideal for professional use and comes with a 10-year warranty from Stabila, Germany.
Thread adaptor for mounting lasers with 5/8˝ threads onto tripods with 1/4˝ screw Made of aluminium Threaded screw Made in Germany
Adaptor screw for mounting lasers with 1/4” onto construction tripods with 5/8” threads. Rotatable platform to align the laser in the desired direction. Made in Germany