Returning Customer ?
Don't have an account ?
Showing 1171–1215 of 1537 results
– for inside-TORX® safety screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon according to DIN 3126 C 6,3, ISO 1173 – TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
– cross-slotted head screws PH – 1/4″ hexagonal shank – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2/ 1.2381
– for plain slotted screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 -male hexagon drive according to DIN 3126 C 8, DIN ISO 1173 -according to DIN ISO 2351-1
– for inside hexagon screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3126 C 8, DIN ISO 1173 – according to DIN ISO 2351-3
– for cross slotted screws PH – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3126 C 8, DIN ISO 1173 – according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PH
– for cross slotted screws PZ – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon according to DIN 3126 C 8, DIN ISO 1173 – according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PZ
– for inside multi-point B&S and XZN screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3126 C 8, DIN ISO 1173
– for inside TORX® screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3128 C 8, DIN ISO 1173 – TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
– for inside-TORX® safety screws – ELORA Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3126 C 8, DIN ISO 1173 – TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
– bit lock with permanent magnet and quick clamping system – quick locker and ejection system – female hexagon drive according to DIN 3126 D 6,3 – male hexagon drive according DIN 3126 E 6,3, DIN ISO 1173
– bit lock with permanent magnet resp. spring clips – with stainless steel sleeve, diameter 9,5 mm – female hexagon drive according to DIN 3126 D 6,3 – male hexagon drive according DIN 3126 E 6,3 DIN ISO 1173 – according to DIN 7427 Form D
4100-is IMPACT SCREWDRIVER INSERT BITS DIN 3126 E 6,3
designed for pressing cable end-sleeves, featuring a side cutter and wire stripping mechanism. Made from high-grade steel C45, it’s available in 155mm and 220mm lengths, embodying German precision and durability.
Screw pitch gauges measure thread pitch, offering diverse models for metric, Whitworth, and American standard threads (UNC, UNF, SAE). Each gauge has specific blades and ranges, essential for mechanical engineering and manufacturing applications.
• for testing of raised and recessed curves • concave and convex shaped blades • fine cutted forms
• matt chrome finish • for testing of raised and recessed curves • concave and convex shaped blades • each blade with 5 measuring points
• with data output RS 232 C • stainless steel, hardened and ground • LCD display with clear reading, zero-setting at any position • On/Off button, reading switchable mm/inch
made in Germany, ranging from TX5 to TX24mm. Crafted from Chrome Vanadium, it features both 1/2″ and 3/8″ drives, adheres to DIN 3120 and ISO 1174 standards, and comes in a durable metal box.
Includes bi-hexagon and hexagon sockets, a sliding T-Bar, extension bars, a tommy bar, universal joint, and reversible ratchet head. Hot forged, matte chrome-plated Chrome-Vanadium steel. Available in metric and imperial sizes. Made in Germany.
The Easy-Laser® XT190 allows even more accurate and efficient alignment of sheaves/pulleys, and is unique to the market in being able to offer digital read off.
Automatic internal clamping chuck for threading short pipe pieces up to 4″. Quick, tool-free operation, efficient production, internal clamping mechanism, durable clamping. REMS – Made in Germany.
Nippelspanner is a manual pipe nipple chuck designed for internal clamping of short pipe pieces. Compatible with various threading machines, it saves time and money by utilizing short pipes efficiently. REMS – Germany.
Steel single acting cylinder, short stroke. All rams are single acting with spring return. Hard chromed piston. Rams inside roll-polished, outside blasted with black nitride finish. Bega Special Tools – BETEX Hydraulic.
for mains operation instead of battery Li-Ion 21.6 V
BETEX NSLS flat hydraulic cylinders: low height, spring return, single acting, 5-150 ton capacity, 6-17 mm stroke, 700 bar pressure, hard chromed piston, roll-polished rams, black nitride finish, compact design.
Hollow, spring return, single acting, 30-60 ton capacity, 50-150 mm stroke, 700 bar pressure, lightweight, chrome plated center hole, side load protection, hard-anodized coating, safety features. BETEX – Netherland.
Threaded rod wrenches ABW are tools used to remove or install materials in the form of threaded rods. This tool can be used in many fields, including construction, mechanics, electronics, and many other applications.
BETEX ADHC cylinders: lightweight aluminum, hollow, double-acting, 30-60 ton capacity, 50-250 mm stroke, 700 bar pressure, steel piston, chrome-plated center hole, carrying handles, hard-anodized coating, piston blow-out protection.
Threaded Rod Sockets BSW are a special type of socket used to clamp steel and iron bars with threads without damaging the threads. The ratchet mechanism is used to quickly and efficiently rotate the threaded rods. By MCC made in Japan.
BETEX ALNC cylinders: lightweight aluminum, 50-100 ton capacity, 50-250 mm stroke, 700 bar pressure, locknuts for safety, easy handling, heavy-duty spring, roll-polished interior, corrosion-resistant anodized coating.
Hydraulic single acting BETEX JLLC cylinders offer 50-1000 ton capacity, 50-300 mm stroke, and 700 bar pressure. Features include a safety locknut, piston protection ring, interchangeable saddle, high-flow coupler, and a durable black nitride finish for heavy-duty applications.
BETEX JLPC hydraulic cylinders, high tonnage, compact, feature load return, safety locknut, and blow-out protection. Ideal for confined spaces, these are durable and versatile for industrial applications.
BETEX NDAC hydraulic cylinders: double-acting, 10-100 ton capacity, 150-470 mm stroke, 700 bar max pressure, hard chromed piston, roll-polished rams, black nitride finish, versatile for diverse industrial applications.
BETEX NDAH hydraulic cylinders: double-acting, hollow, 30-100 ton capacity, 76-257 mm stroke, 700 bar max pressure, hard chromed piston, roll-polished rams, black nitride finish, versatile for heavy-duty applications.
BETEX NSHS Series features single-acting hydraulic hollow cylinders with spring return, offering capacities from 12 to 100 tons, strokes of 8-158 mm, hard chromed pistons, and a black nitride finish.
BETEX NSSS single-acting cylinders are robust, reliable, and suitable for a wide range of hydraulic applications. Their design features and high working pressure make them a valuable choice for industries requiring efficient and durable hydraulic systems.
• for adjusting, levelling etc. • rolled in a rugged plastic box or as stripes in a case with 10 or 5 blades • different material in different width and different length available
Teeth additionally inductive hardened – Easy and quick adjusting due to knurled adjustment – Self-locking due to gripping surfaces staggered in reverse order – Made in Germany
