Returning Customer ?
Don't have an account ?
Showing 1126–1170 of 1543 results
• dust resistant acc. to DIN 40050 / IEC 60529 • for chordal measurement of gear teeth, keys, ribs, fins, etc. • Absolute Measurement System (ABS-system) • with data output RS232 C
• dust resistant acc. to DIN 40050 / IEC 60529 • Absolute Measurement System (ABS-system) • frame lacquered, with insulation plates, sturdy quality • large LCD display, clear reading, digit height 8 mm
• water and coolant resistant acc. to DIN 40050 / IEC 60529 • with USB data output • sturdy quality, frame lacquered, with insulation plates • large LCD display, clear reading, digit height 7 mm
• with data output RS232 C • for measuring odd fluted taps, milling cutters, reamers, etc. • LCD display, clear reading, digit height 7 mm, mm/inch switchable
Top model for industry purposes. Micrometer with optical tolerance alarm by LED signal. with data output (micro USB). spray water resistant acc. to DIN 40050 / IEC 60529
features an LCD display, switchable mm/inch units, a non-rotating spindle, ABS/INC system, zero setting, On/Off button, locking wheel, ratchet, and RS232 C data output. It is dust-resistant and includes a 1.5 V battery and operation manual.
• for measuring pipe wall thicknesses etc. • Absolute Measurement System (ABS-system) • with data output RS232 C
• with small anvil measuring surfaces • Absolute Measurement System (ABS-system) • with data output RS232 C • LCD display with clear reading, digit height 7 mm, mm/inch switchable
• with 30° and 15° measuring tips • Absolute Measurement System (ABS-system) • with data output RS232 C
• with 100-step graduation • drum and sleeve matt chrome, frame lacquered, with insulation plates • carbide surfaces lapped, spindle hardened and ground • locking lever for quick and precise fixing • with friction ratchet for constant measuring pressure • with adjustment key, from 25 mm with setting gauge
• for large measuring ranges • with exchangeable extension • with lightweight metal frame
• with 50 mm spindle revolution • 100 step graduation • drum and sleeve matt chrome finish • lightweight metal frame, hammer blow grey lacquered
• for chordal measurement of gear teeth, keys, ribs, fins, etc. • drum and sleeve matt chrome finish • turning spindle, module 0.8 – 6
• for measuring odd fluted taps, milling cutters, reamers, etc. • drum and sleeves matt chrome finish • non-rotating spindle • frame lacquered, with insulation plates
• for external thread measurements • drum and sleeve matt chrome finish • frame hammer blow grey lacquered, with insulation plates
• to measure small penetrations, grooves, etc. • drum and sleeve matt chrome finish • frame lacquered, with insulation plates • flat measuring ends, flat surfaces
• for professional industry purposes • accuracy better than DIN 863 • sturdy quality, in high precision version • drum and sleeve matt chrome finish
• lightweight design, metric graduation • e.g. for use in the workshop • drum and sleeve matt chrome finish • frame hammer blow blue lacquered
• sturdy quality, in top precision version • drum and sleeve matt chromed finish • hammer blow grey lacquered frame, with insulation plates • carbide surfaces, lapped, spindle hardened and ground • locking lever for quick and precise fixing
• with inch graduation • for standard expectations • drum and sleeve matt chrome finish • frame hammer blow grey lacquered, with insulation plates
• easy handling and precise reading • mechanical digital counter, frame lacquered, with insulation plates • carbide surfaces, lapped, spindle hardened and ground • with ratchet for constant measuring pressure
• for standard requirements in measuring • drum and sleeve matt chrome finish • frame hammer blow grey lacquered, with insulation plates • carbide surfaces, lapped, spindle hardened and ground • locking lever for quick and precise fixing • with ratchet for constant measuring pressure • with adjustment key, from up 25 mm with setting gauge
• for measuring plates and panels • 100 step graduation • with deep frame • drum and sleeve matt chrome finish
• large measuring range • with adjustable anvil • with lightmetal frame • with 50 mm spindle revolution
• stainless steel, hardened, vernier and scale matt chrome finish • surfaces finely ground, with fixing screw • mono block vernier, reading 0.05 mm
• spring loaded end gauges • with screw-on extensions • up to 6000 mm measuring range available • drum and sleeve matt chrome finish
• high standard quality, for calibration purposes • drum and sleeve matt chrome finish • measuring pin and surface hardened and fine ground • measuring face plane ground and lapped • clamping wheel for quick and precise fixing • with ratchet for constant measuring pressure
• absolute System, high accuracy, with data output RS232 • LCD display with clear reading, mm/inch switchable • frame lacquered, with insulation plates • ORIGIN button, ABS/INC measurement system
• resiliently mounted end gauges • with screw-on extensions • up to 1450 mm measuring range available • drum and sleeve matt chrome finish
• triple-jointed arm with central mechanical clamping • all joints are clamped with just one twist grip • ball joints allow a fast and safe positioning
• special wear-resistant casting with additionally steel • strong ribbed construction, side surfaces reinforced • measuring surface according to DIN 876 • side surfaces carefully planed or milled • with supporting points, corresponding to the size of plate • against extra charge we supply the plates with handle and with protective wooden cover
• special wear-resistant casting with additionally steel • strong ribbed construction, side surfaces reinforced • measuring surface according to DIN 876 • side surfaces carefully planed or milled
• solid or ribbed construction • special wear resistant steel casting • surfaces and four sides fine planed • against extra charge the plates can be supplied also with bores, holes or T-slots
• solid angular steel construction, powder coated, grey (RAL 7001) • 3-point support M 24 x 80 mm • 2 extra support for tipping protection, with adjusting screws • single packed on an Euro-pallet
• especially for maintenance and service tasks for lifts • special set for lift and wire/cable measurement • with LCD display for optical or mechanical speed detection
For testing the acid density on conventional batteries with screw caps. Areometers are valuable tools for measuring density or specific gravity, and they find applications in a wide range of industries where precise measurements of liquid density are required.
• for checking and transferring angles • large LCD display with clear reading, digit height 10 mm • blades in anodized aluminium with profile grooves, and embedded magnet strips • On/Off button and data hold function, with fixing screw • 180° rotating display, by pressing function button
• top quality, for calibration purpose • stainless, hardened and fine ground • scales matt chrome finish • parallaxfree reading by vernier, with large magnifying lens • with fine adjustment
Universal Bevel Protractor Set offers a reliable and precise solution for measuring angles. With its three blades of different lengths, stainless steel construction, fine adjustment capability, and parallax-free reading.
for external retaining rings acc. to DIN 471, DIN 983 straight jaws, self-opening due to mounted spiral spring gunmetal-finish, ground joint
