Returning Customer ?
Don't have an account ?
Showing 46–89 of 89 results
The high-quality ELORA 890-Series hook wrench, compliant with DIN 1810 Form A standards and made in Germany, is designed for loosening/tightening DIN 1804 grooved nuts and DIN 981 antifriction bearing bolts. It features a convenient design, a robust one-piece construction, and adherence to industrial standards. ELORA Germany.
Universal pullers with 2 sliding legs 317 Series. For pulling off ball bearings, gear-wheels, discs, etc. Heavy-duty bearing pullers, forged pattern, 2 arms. There are 6 models with open jaws differences. ELORA – Made in Germany.
• reading from left to right • semi rigid version, with wide cross section • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • up to 2000 mm in a vinyl bag
ELORA 1541 universal bevel protractor features 4 quadrants of 90°, precision to 1/12° and 5″, stainless steel composition, hardened rail, matte chrome reading, locking screw, magnifier, available in 200mm and 300mm
ELORA 793- 1.1/2 Inch Hexagon Impact Socket built for power tools, boasts premium special steel and a durable phosphate finish. It complies with DIN 3121-H 40 and ISO 1174, fitting 1.1/2-inch square drives. Engineered for high torque and speed, it’s suitable for pneumatic guns and torque wrenches. Its size consistency and safety features.
• stainless steel guideway • with handwheel for quick adjustment and fine adjustment • LCD display with clear reading, reading mm / inch switchable • On/Off switch, zero-setting at any position • Preset-function, max. sliding speed 1.5 m/sec
Machine Tap ISO 529 Form B HSSE – UN 1.3/4 x 8 for general use non abrasive material up to 900 N/mm². Unalloyed and low alloyed steel. Use for through holes. VOLKEL – Germany.
• for adjusting, levelling etc. • rolled in a rugged plastic box or as stripes in a case with 10 or 5 blades • different material in different width and different length available
acc. to workshop grade • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • graduation reading from left to right, zero-point in the middle • top and bottom 1/1 mm graduation
One-piece twist drill bit, fully ground from the solid, long version with hexagonal shank for bit holder (1/4“; E 6,3), polished section of the surface of the cone 118°, blank ground
For standard purposes, like thickness measuring between narrow slots and for automotive and engine industry. Hardened spring steel, conical shaped blades, 100mm lenght.
Carton box packed Flat and straight pattern. Thin-walled heads Matt chrome plated Chrome-Vanadium 31CrV3 / 1.2208 According to DIN 837, Form B, ISO 3318, ISO 1085
featuring a fully hardened and tempered body, inductively tempered head, and sharpened edge. Its black-coated shaft and ELORA-Chrome-Vanadium steel ensure durability, with various sizes available for different tasks.
Offer reliable, leak-proof connections for fluid systems. Sizes range from ⅛ to 2 inches, ensuring compatibility and a secure seal across various applications in plumbing, gas, and steam transport. Made in Germany
Titanium nitrified twist drill, fully ground from the solid, right hand cutting, with spiral type N. Crosswise sharpened acc. to DIN 1412C (from 3,0 mm) 118° for good centering and fast drilling. Tolerance of diameter h8. Professional hard-wearing coating for a long service life
Two straight main cutting edges with chip breaking flutes. With stepped cylindrical shank Ø 13 or 16 mm.
2200 – 4000 rpm. e.g. Ø 16 mm 2200 rpm in soft wood. Further details in the speed diagram
Twist drill made of cobalt alloyed HSS-G, acc. to DIN 340, fully ground from the solid, long version, special spiral form, for a good chip removal when drilling deep holes and for greasing materials. Crosswise sharpened acc to. DIN 1412C, point angle 135°, tolerance of diameter h8
Engineer square ELORA 1571 is a durable, galvanized steel engineer square with a stop, designed for precise measurements and markings in woodworking and metalworking. Its 90° angle and stable base make it essential for accurate work, and being made in Germany ensures high-quality standards and longevity.
Mobile storage for stainless steel shims in various sizes and thicknesses. Available in three models, they accommodate precision alignment tasks with ease, compatible with Betex tools for comprehensive application support.
Tool made from ELORA-Chrome-Molybdenum-Vanadium steel. It features an inductively tempered striking head, a sharpened and oiled working edge, and a black-coated shaft for corrosion resistance.
The ELORA 86 Ring Slogging Spanner, meeting DIN 7444 standards. It’s designed for heavy-duty applications, boasting sand-blasted surface treatment, a wide size range, and a unique 12-point design for secure gripping and reduced slippage. This German-made tool excels in challenging industrial and construction environments, prioritizing safety and efficiency.
Special twist drill made of cobalt alloyed HSS, acc. to DIN 1869, fully ground of the solid, extra long version, right hand cutting. Profile crosswise sharpened 135°
Premium version, fully ground quality with two main cutting edges and two taper taps. Specially ground spiral for a very good chip removal. 2400 – 8000 rpm e.g. Ø 4 mm 5000 rpm in European hard wood. Further details in the speed diagram
The ELORA 87 is a high-quality open end slogging spanner. It’s forged for durability, featuring a slip-resistant sand-blasted surface. It comes in various sizes to accommodate different fasteners and adheres to DIN 133 standards. While sturdy and versatile, its weight and size limitations are worth considering for specific applications.
TCT brad point drill bit, cylindrical, two main cutting edges, two taper taps. Spiral form N. 4.000 – 10.000 rpm e.g. Ø 5 mm 8.000 rpm in European hard wood. Further details in the speed diagram.
• special wear-resistant casting with additionally steel • strong ribbed construction, side surfaces reinforced • measuring surface according to DIN 876 • side surfaces carefully planed or milled
type B = ½ mm / mm top ½ mm and bottom 1/1 mm graduation reading from right to left • semi rigid version, with wide cross section • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • up to 2000 mm in a vinyl bag
Automatic internal clamping chuck for threading short pipe pieces up to 4″. Quick, tool-free operation, efficient production, internal clamping mechanism, durable clamping. REMS – Made in Germany.
• calculation of ascend/descend, angle and deviation • with self-calibration function • power On/Off button, data hold function • with 1 x horizontal vial and 1 x vertical vial • incl. 2x battery 1.5 V (type AAA, art.-no.: 609283) • with operation manual
Twist drill with long shank and specially ground roof-like tip, which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations. 800 – 2500 rpm, e.g. Ø 10 mm 2500 rpm in formwork panel. Made in Germany
600 – 6000 rpm. e.g. Ø 68 mm 1300 rpm in European hard wood. Further details in the speed diagram
acc. to DIN 2014/32/EU • reading from left to right or right to left • precise, deep graduation laser engraved, continuing numbers • non glare, matt surface • stainless spring steel • with identification-no
Twist drill, made of cobalt alloyed HSS, acc. to DIN 338, fully ground from the solid. Fitted with a special spiral for good chip removal and greasing materials. Crosswise sharpened acc. to DIN 1412C, point angle 135°, tolerance of diameter h8
Type B = ½ mm / mm top with 1/2 mm and bottom with 1/1 mm graduation • conform to MID-Code • precise and deep, laser engraved scale, with clear reading • stainless steel, non-glare, matt surface • semi-rigid, with wide cross-section • cm graduation • with identification-no. and certificate of conformity
type B = ½ mm / mm top with 1/2 mm and bottom with 1/1 mm graduation • conform to MID-Code • precise, etched scale, with clear reading • stainless steel, non-glare, matt surface • semi-rigid, with wide cross-section • cm graduation • with identification-no. and certificate of conformity
The BETEX iDuctor induction pad, made in the Netherlands, is designed for paint and adhesive removal, compatible with iDuctor 1 and 2, featuring a 3.5 mm wire thickness and a max temperature of 150°C.
Flexible inductors, exceeding 2 meters in length, are ideal for heating larger, heavier components, recommended for use with iDuctor 2 models (2000W or 2300W) to ensure efficient, effective heating across diverse parts.
Designed for the iDuctor 1 and 2, include nine pieces with a wire thickness of 3.5 mm, accommodating bolt sizes M8-M30, and feature a U-inductor for versatile, precise heating applications.
BETEX NSHS Series features single-acting hydraulic hollow cylinders with spring return, offering capacities from 12 to 100 tons, strokes of 8-158 mm, hard chromed pistons, and a black nitride finish.
• graduation on front- and rearside • reading from left to right • with two straight ends without whole • precise, deep laser engraved scale • non-glare, matt surface, with clear reading • with detachable magnetic inserts • non-glare, matt surface
The Tiger Brake Winch is a versatile, high-quality winch with automatic load-actuated brake, enclosed components for protection, and various models (800lbs to 2600lbs). It offers flexibility, durability, and safety.
With brad point, two main cutting edges and protruding cutting edges. 1000 – 5000 rpm e.g. Ø 5 mm 5000 rpm in softwood. Further details in the speed diagram