Hydraulic wedge 18 ton Powerram HLW18T gap min. 9.5mm
Available on backorder
Delivers 180 kN vertical lift with 9.5 mm access gap. Step height 19.0 mm, max lift 67.5 mm. Single-acting, 700 bar, 3/8″ NPT port. Stable, controlled lifting. External pump required.
Price from: € 1,160.0
(Price excluding tax, for reference only.)
Available on backorder
Hydraulic wedge 18-ton Powerram HLW18T gap min. 9.5mm. The Powerram HLW18T hydraulic wedge delivers a lifting force of 180 kN (18 tons), designed for vertical lifting tasks in confined spaces. It operates through a single-acting hydraulic ram connected to a 3/8-inch NPT port and runs at a working pressure of 700 bar. This wedge is actuated via an external hydraulic hand pump (not included).
- Actuated by an external hydraulic hand pump.
- Designed to lift or lower objects in a controlled manner.
- Safe, smooth, secure hold when lifting or lowering heavy equipment.
- Access gap of only 9.5mm.
- Operates with an access gap of only 9.5mm.
- Each step offers 19.0mm of vertical lift.
- Maximum lift using a stepped block 67.5mm
- Single-acting ram.
- HLW18T Standard KIT.
- Lifting force of 180kN (18T).
- Automatic manual retraction.
The lifting head enters tight spaces with a minimum access gap of 9.5 mm. Each lifting step raises the load by 19.0 mm, and the stepped block supports a maximum lift of 67.5 mm. The mechanism ensures stable and controlled vertical movement, holding heavy components securely in position during lifting or lowering. Automatic manual retraction simplifies operation after use.
