Returning Customer ?
Don't have an account ?
Showing 1–45 of 77 results
BETEX Cone Heater CHU 230V is a lightweight, easy-to-use electric bearing heater for small workshops. It efficiently heats bearings and metal components at 725W and 230V, ensuring safe, clean operation and extending component lifespan. Ideal for budget-conscious settings without temperature control or heat retention.
Length of cutting edges: 40 – 90mm For long straight cuts Adjustable, bolted joint High grade tool steel, forged Trap protection
Crafted for convenience, the ELORA 237 allows for easy magnetization and demagnetization of tools such as screwdriver blades, facilitated by its “+” and “-” openings. This cadmium-free tool, built with high-quality yellow plastic and industrial-grade magnets.
Induction Heater is a benchtop model with a 150 kg capacity, swing arm design, digital display, automatic demagnetization, and temperature control up to 240°C. BETEX – Made in Netherland.
Introducing the BETEX SLF 302 Induction Heater from the SMART series, designed for precise and controlled heating processes. This advanced induction heater is equipped with a user-friendly touchscreen interface and dual temperature sensing capabilities using Delta-T technology.
Part of the SMART series, offers controlled, precise heating for bearings with dimensions up to 400 mm in diameter and 50 kg in weight. It features a touchscreen, dual temperature probes, a logging function, and includes three yokes. It comes with a 3-year warranty.
– large LCD display with clear reading, digit height 7 mm – frame lacquered, with insulation plates – carbide surfaces, lapped, spindle hardened and ground – autom. shutdown, zero setting at any position – mm/inch switchable, without data output
BETEX 24 XLDi Portable 230V is a lightweight, versatile induction heater for components up to 180mm OD and 10kg. Features digital display, magnetic probe, no yokes needed, and 150°C max temperature, ideal for on-site use.
enables one-handed use with its spring mechanism, offers adjustable impact, and is finished in gunmetal. Lightweight at 105g, it provides safety and precision for marking workpieces.
Min. inside diameter Ø, vertical/horizontal: 10/65 mm Max. outside diameter Ø400 mm Max. width: 120 mm Max. weight: 50 kg
Efficient heating with time or temperature mode, automatic demagnetization, and a robust design for industrial use. It includes five yokes, a magnetic temperature probe, and features like temperature hold and an easy-to-use interface
Lightweight, easy to use, and heats up to 10kg components with a max OD of 180mm. Features digital display, magnetic probe, automatic demagnetisation, and thermal protection. Made in Netherlands.
For highest operational demands Inductive hardened cutting blades Cutting blades hardness 61-63 HRC Gunmetal-finish, ground head ELORA-high grade tool steel C45 / 1.0503
BETEX iDuctor 1 is a 1200W, 230V precision heating tool for flameless metal heating, featuring a 2m flexible inductor, heat-resistant gloves, ergonomic design, and safety features for efficient, safe, and versatile applications.
Induction hand tool for precision, flameless heating of metal parts, featuring a 2m flexible inductor, ergonomic design, and optional accessories for fast, efficient, and safe applications. & heat resistant gloves (max.250°C)
Effortless, precise cutting is the order of any day that you go pruning with the robust efficiency of the FELCO 230 loppers. The straight blade and anvil combination cut through hard and dead wood with ease. An ingenious gearing system puts 65% extra power in your hands, along with the lightweight construction and 80cm/31.4 inches long handles all ensure cutting branches of up to 40mm / 1.57 inches feels routine, even when used overhead.
The FAMAG 1623 Forstner bit (BORMAX 2.0) is a long version for woodworking. It features grooved cutting edges, low heat development, and rapid drilling in various wood materials. Suitable for freehand and stationary use. Made in Germany.
Self-centering, easy to convert, 2-arm or 3-arm puller. The arms slide inwards or outwards simultaneously. Can be used in any position. Adapters included. There are 6 models with 4, 6, 8, 12, 20 and 30 ton capacity. BETEX – Holland.
Traditional Forstner bit with centre point, two main cutting edges and two circumferential cutters. Low friction due to the reduced peripheral cutting edge
BETEX HXPM 50 tons 2/3-arm hydraulic puller, with its self-centering design, adjustable height, and strong grip, offers safe, efficient disassembly of transmission parts. It includes a safety release valve and remote control, enhancing safety and ease of use.
For punching of carton, leather, rubber, sealing material. Forged, cutting edge hardened and ground. Shaft red coated. Lightly conical inside for easy removal of the cuttings. High grade steel
ELORA 286- belt punch, conforming to DIN 7200 Form B, is ideal for punching soft materials like leather and rubber. Forged from high-grade steel with a hardened, ground cutting edge and a red-coated shaft, it offers diameters from Ø1mm to Ø25mm. Made in Germany.
SIDSP® stands for Sensor-Integrated Digital Signal Processing – a technology where the signals are completely processed into digital form inside the sensor at the time and point of measurement. SIDSP® sensors are manufactured according to completely new state-of-the-art production techniques.
Rapid drilling in soft wood, European hard wood, chipboard, MDF etc. Rapid chipping of solid wood and chipboards. Clearly less effort is needed and boring is more rapid than with the usual Forstner bit
Exerting the maximum cutting power of the FELCO 210A-60 loppers will never feel like hard work. On the contrary, the most difficult task will be putting these loppers away after a pruning session; such is the power, ease and precision that the curved cutting head provides. Not only will the pruning still be there next day but so will the same dependable flexibility and comfort, thanks to the lightweight aluminium tube handles and the forgiving shock absorbers. It’s always good to have something to look forward to.
“Lewis” pattern, crest of thread, main cutting edge and taper tap in premium quality. Version with stepped head and hexagonal shank from Ø 8mm.
500 – 2800 rpm. e.g. Ø 12 mm 2000 rpm in soft wood. Further details in the speed diagram
• for chordal measurement of gear teeth, keys, ribs, fins, etc. • drum and sleeve matt chrome finish • turning spindle, module 0.8 – 6
• with data output RS 232 C • stainless steel, hardened and ground • LCD display with clear reading, zero-setting at any position • On/Off button, reading switchable mm/inch
As soon as you pick up the FELCO 200C-60 loppers, you can feel a difference, they are light, very light. Carbon fiber handles provide for an extremely lightweight and robust tool. If you plan to do extensive overhead pruning or if you need lightweight tool, look no further. These are exceptionally lightweight and hardworking loppers for fine and large pruning and provide exceptional comfort from the rubber shock absorbers.
• for external thread measurements • drum and sleeve matt chrome finish • frame hammer blow grey lacquered, with insulation plates
Bormax® 2.0 prima with exchangeable pre-drill bit, centre drill bit or guiding pin. Much less feed force needed as well as minimized friction and therefore less heat generation. Reasons: The two main cutting edges are grooved shifted, as well as the toothed linear grooved pre-cutters. A matching centre drill bit and an allen wrench are included in the delivery. Hexagonal shank for a better power transfer
made of ELORA-Chrome-Vanadium steel, is designed for verifying the positioning and diameter of drill bores. Its h9 shaft tolerance ensures precise measurements for consistent machining accuracy across various sizes.
Complying with DIN 3113, Form B, ISO 3318, and ISO 7738 standards, they feature Chrome-Vanadium construction, deep offset ring ends for tight spaces, and matte chrome plating for durability and aesthetics. Made in Germany.
Engineered by ELORA in Germany, this long version wrench excels in cramped areas. Its fix-mounted socket boasts a magnet for secure fastener retention and a cardan joint for flexible angles. With chrome-plated durability and Chrome-Vanadium construction, it ensures precise work in challenging spaces. A reliable tool for professionals and DIY enthusiasts.
The ELORA 236-LM wrench, engineered by ELORA in Germany, is tailored for intricate work in cramped spaces. Its extended length enhances reach, while a fixed-mounted socket with a cardan joint allows flexible angles. With a versatile 3/8″ square drive and chrome-plated, Chrome-Vanadium construction, it offers durability and corrosion resistance.
German-made DIN 3110 spanner. Precision, chrome-vanadium steel, complies with international standards. Durable, versatile tool for professionals in various industries. ELORA – Made in Germany.
• for measuring odd fluted taps, milling cutters, reamers, etc. • drum and sleeves matt chrome finish • non-rotating spindle • frame lacquered, with insulation plates
• with 50 mm spindle revolution • 100 step graduation • drum and sleeve matt chrome finish • lightweight metal frame, hammer blow grey lacquered
BETEX HP hydraulic pullers have an integrated pump and cylinder, compact design, strong grip, and are ideal for various applications. They are economical, safe, and versatile with available accessories.
The first carbide tipped Forstner bit with centre point, carbide-tipped main cutting edge and toothed circumferential cutter. Hexagonal shank for a better power transfer
Combination Spanner 203- is a versatile tool, made in Germany. It features a bent design for tight spaces, matte chrome plating for durability, and compliance with industry standards. Ideal for mechanics, it simplifies fastener handling and ensures safety and performance. Elora Germany.
• dust resistant acc. to DIN 40050 / IEC 60529 • Absolute Measurement System (ABS-system) • frame lacquered, with insulation plates, sturdy quality • large LCD display, clear reading, digit height 8 mm • with carbide surfaces, lapped, spindle hardened and ground
• dust resistant acc. to DIN 40050 / IEC 60529 • for chordal measurement of gear teeth, keys, ribs, fins, etc. • Absolute Measurement System (ABS-system) • with data output RS232 C
• with inch graduation • for standard expectations • drum and sleeve matt chrome finish • frame hammer blow grey lacquered, with insulation plates