Returning Customer ?
Don't have an account ?
Showing 136–180 of 275 results
• hook with saftey lock, made from forged steel, chromed, turnable • standard with internal battery, incl. charge 230 V/AC • remote control incl. 2x 1.5 V battery (type AAA, art.-no.: 609283) • adjusting programme (CAL), weigh-in function, by pressing TARE-button switches over to “0” • Made in Germany
• reliability thanks to automatic internal adjustment and EC type approval • industry scale with stainless steel weighing plate • with USB interface and RS232
The V-Block Pair with Clamps, made from hardened special or stainless steel, includes two 90° V-cuts with finely ground surfaces and angularly ground front faces, adjusted in pairs for precise clamping and marking of cylindrical pieces.
• stainless steel guideway • with handwheel for quick adjustment and fine adjustment • LCD display with clear reading, reading mm / inch switchable • On/Off switch, zero-setting at any position • Preset-function, max. sliding speed 1.5 m/sec
• with vernier reading • for measurements of flat welding seams and in corners etc. • stainless steel hardened and fine ground • scale matt chromed • with fixing screw
The Electr. Digital Anemometer 0.3 ~ 30 m/s is a state-of-the-art device designed to cater to a wide range of professionals and outdoor enthusiasts. With its exceptional capabilities and robust features, it is the go-to solution for measuring wind speed in various units and under diverse conditions.
The Electr. Digital Anemometer 0.3 ~ 45 m/s is a state-of-the-art device designed to cater to a wide range of professionals and outdoor enthusiasts. With its exceptional capabilities and robust features, it is the go-to solution for measuring wind speed in various units and under diverse conditions.
Dimensions mm (lxwxh): 357x305x96 mm Weight incl. all parts case: 2.75 kg Displayed resolution: 0.01 mm
• for marking centers on round discs and shafts • special steel, chromed finish • scale in matt chrome finish, with mm graduation
• with flat sliding ruler and marking block • with fixing screw • made of Dur-Aluminium, hardened with HRC63 • scratch-resistant, black anodized surface • marking block made of steel
Vogel Germany, DIN 875/0 standards, is essential for inspection rooms and test laboratories. Made from stainless or special hardened steel, it features an extra fine ground surface and is available in flat or with back designs.
Precision Inspection Square with back by Vogel Germany, made of carbon steel, meets DIN 875/0 standards for high precision in measuring flatness and perpendicularity. Ideal for various industries, it ensures accurate and reliable measurements.
• for locksmith, workshop use, mechanics, training, etc. • special steel, galvanized finish • flat or with back, at your choice
• for marking centers on round discs and shafts • made of Dur-Aluminium, hardened with HRC63 • sratch-resistant, black anodized surface • laser engraved, clear reading scale, with mm graduation
• stainless steel, flat or with back • for standard machinery purpose • edges and sides fine ground
• precision class • stainless steel, hardened • scale and vernier satin chrome finish, laser engraved scale • jaws finely ground • offset jaws for inside measurements • with or without fine adjustment, without knife points
• standard model for industry and craft • with glass rail for more accuracy • spray water proof acc. to DIN 40050 / IEC 60529
• top model for industry purposes • with glass rail for more accuracy • spray water proof acc. to DIN 40050 / IEC 60529 • with duo data output (connectivity also for Digimatic measuring devices)
• water and coolant proof acc. to DIN 40050 / IEC 60529 • with 2 mm spindle feed for quick measuring • with Sylvac electronic • with Proximity data output
– large LCD display with clear reading, digit height 7 mm – frame lacquered, with insulation plates – carbide surfaces, lapped, spindle hardened and ground – autom. shutdown, zero setting at any position – mm/inch switchable, without data output
• dust resistant acc. to DIN 40050 / IEC 60529 • Absolute Measurement System (ABS-system) • frame lacquered, with insulation plates, sturdy quality • large LCD display, clear reading, digit height 8 mm • with carbide surfaces, lapped, spindle hardened and ground
• dust resistant acc. to DIN 40050 / IEC 60529 • for chordal measurement of gear teeth, keys, ribs, fins, etc. • Absolute Measurement System (ABS-system) • with data output RS232 C
• dust resistant acc. to DIN 40050 / IEC 60529 • Absolute Measurement System (ABS-system) • frame lacquered, with insulation plates, sturdy quality • large LCD display, clear reading, digit height 8 mm
• water and coolant resistant acc. to DIN 40050 / IEC 60529 • with USB data output • sturdy quality, frame lacquered, with insulation plates • large LCD display, clear reading, digit height 7 mm
• with data output RS232 C • for measuring odd fluted taps, milling cutters, reamers, etc. • LCD display, clear reading, digit height 7 mm, mm/inch switchable
Top model for industry purposes. Micrometer with optical tolerance alarm by LED signal. with data output (micro USB). spray water resistant acc. to DIN 40050 / IEC 60529
features an LCD display, switchable mm/inch units, a non-rotating spindle, ABS/INC system, zero setting, On/Off button, locking wheel, ratchet, and RS232 C data output. It is dust-resistant and includes a 1.5 V battery and operation manual.
• for measuring pipe wall thicknesses etc. • Absolute Measurement System (ABS-system) • with data output RS232 C
• with small anvil measuring surfaces • Absolute Measurement System (ABS-system) • with data output RS232 C • LCD display with clear reading, digit height 7 mm, mm/inch switchable
• with 30° and 15° measuring tips • Absolute Measurement System (ABS-system) • with data output RS232 C
• with 100-step graduation • drum and sleeve matt chrome, frame lacquered, with insulation plates • carbide surfaces lapped, spindle hardened and ground • locking lever for quick and precise fixing • with friction ratchet for constant measuring pressure • with adjustment key, from 25 mm with setting gauge
• for large measuring ranges • with exchangeable extension • with lightweight metal frame
• with 50 mm spindle revolution • 100 step graduation • drum and sleeve matt chrome finish • lightweight metal frame, hammer blow grey lacquered
• for chordal measurement of gear teeth, keys, ribs, fins, etc. • drum and sleeve matt chrome finish • turning spindle, module 0.8 – 6
• for measuring odd fluted taps, milling cutters, reamers, etc. • drum and sleeves matt chrome finish • non-rotating spindle • frame lacquered, with insulation plates
• for external thread measurements • drum and sleeve matt chrome finish • frame hammer blow grey lacquered, with insulation plates
• to measure small penetrations, grooves, etc. • drum and sleeve matt chrome finish • frame lacquered, with insulation plates • flat measuring ends, flat surfaces
• for professional industry purposes • accuracy better than DIN 863 • sturdy quality, in high precision version • drum and sleeve matt chrome finish
• lightweight design, metric graduation • e.g. for use in the workshop • drum and sleeve matt chrome finish • frame hammer blow blue lacquered
• sturdy quality, in top precision version • drum and sleeve matt chromed finish • hammer blow grey lacquered frame, with insulation plates • carbide surfaces, lapped, spindle hardened and ground • locking lever for quick and precise fixing
• with inch graduation • for standard expectations • drum and sleeve matt chrome finish • frame hammer blow grey lacquered, with insulation plates
• easy handling and precise reading • mechanical digital counter, frame lacquered, with insulation plates • carbide surfaces, lapped, spindle hardened and ground • with ratchet for constant measuring pressure
