Returning Customer ?
Don't have an account ?
Showing 271–315 of 368 results
• solid angular steel construction, powder coated, grey (RAL 7001) • 3-point support M 24 x 80 mm • 2 extra support for tipping protection, with adjusting screws • single packed on an Euro-pallet
• especially for maintenance and service tasks for lifts • special set for lift and wire/cable measurement • with LCD display for optical or mechanical speed detection
• for checking and transferring angles • large LCD display with clear reading, digit height 10 mm • blades in anodized aluminium with profile grooves, and embedded magnet strips • On/Off button and data hold function, with fixing screw • 180° rotating display, by pressing function button
• top quality, for calibration purpose • stainless, hardened and fine ground • scales matt chrome finish • parallaxfree reading by vernier, with large magnifying lens • with fine adjustment
Universal Bevel Protractor Set offers a reliable and precise solution for measuring angles. With its three blades of different lengths, stainless steel construction, fine adjustment capability, and parallax-free reading.
Screw pitch gauges measure thread pitch, offering diverse models for metric, Whitworth, and American standard threads (UNC, UNF, SAE). Each gauge has specific blades and ranges, essential for mechanical engineering and manufacturing applications.
• for testing of raised and recessed curves • concave and convex shaped blades • fine cutted forms
• matt chrome finish • for testing of raised and recessed curves • concave and convex shaped blades • each blade with 5 measuring points
• with data output RS 232 C • stainless steel, hardened and ground • LCD display with clear reading, zero-setting at any position • On/Off button, reading switchable mm/inch
Steel single acting cylinder, short stroke. All rams are single acting with spring return. Hard chromed piston. Rams inside roll-polished, outside blasted with black nitride finish. Bega Special Tools – BETEX Hydraulic.
Hollow, spring return, single acting, 30-60 ton capacity, 50-150 mm stroke, 700 bar pressure, lightweight, chrome plated center hole, side load protection, hard-anodized coating, safety features. BETEX – Netherland.
BETEX ADHC cylinders: lightweight aluminum, hollow, double-acting, 30-60 ton capacity, 50-250 mm stroke, 700 bar pressure, steel piston, chrome-plated center hole, carrying handles, hard-anodized coating, piston blow-out protection.
BETEX ALNC cylinders: lightweight aluminum, 50-100 ton capacity, 50-250 mm stroke, 700 bar pressure, locknuts for safety, easy handling, heavy-duty spring, roll-polished interior, corrosion-resistant anodized coating.
Hydraulic single acting BETEX JLLC cylinders offer 50-1000 ton capacity, 50-300 mm stroke, and 700 bar pressure. Features include a safety locknut, piston protection ring, interchangeable saddle, high-flow coupler, and a durable black nitride finish for heavy-duty applications.
BETEX JLPC hydraulic cylinders, high tonnage, compact, feature load return, safety locknut, and blow-out protection. Ideal for confined spaces, these are durable and versatile for industrial applications.
BETEX NDAC hydraulic cylinders: double-acting, 10-100 ton capacity, 150-470 mm stroke, 700 bar max pressure, hard chromed piston, roll-polished rams, black nitride finish, versatile for diverse industrial applications.
BETEX NDAH hydraulic cylinders: double-acting, hollow, 30-100 ton capacity, 76-257 mm stroke, 700 bar max pressure, hard chromed piston, roll-polished rams, black nitride finish, versatile for heavy-duty applications.
BETEX NSHS Series features single-acting hydraulic hollow cylinders with spring return, offering capacities from 12 to 100 tons, strokes of 8-158 mm, hard chromed pistons, and a black nitride finish.
BETEX NSSS single-acting cylinders are robust, reliable, and suitable for a wide range of hydraulic applications. Their design features and high working pressure make them a valuable choice for industries requiring efficient and durable hydraulic systems.
• for adjusting, levelling etc. • rolled in a rugged plastic box or as stripes in a case with 10 or 5 blades • different material in different width and different length available
Numbering up to 500 mm lenght with continuing mm numbering. The rules from 1000 mm up to 2000 mm lenght with continuing cm numbering. The rules according to EC Class I and are qualified as reference pieces.
Type A = mm / mm top and bottom 1/1 mm graduation • reading from left to right • semi rigid version, with wide cross section • stainless spring steel, with non glare, matt surface • precise, deep graduation with laser engraved, continuing numbers • with identification-no. and calibration certificate
Type B = ½ mm / mm top ½ mm and bottom 1/1 mm graduation • reading from left to right • semi rigid version, with wide cross section • stainless spring steel, with non glare, matt surface • precise, deep graduation with laser engraved, continuing numbers • with identification-no. and calibration certificate
acc. to DIN 2014/32/EU • reading from left to right or right to left • precise, deep graduation laser engraved, continuing numbers • non glare, matt surface • stainless spring steel • with identification-no
acc. to workshop grade • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • graduation reading from left to right, zero-point in the middle • top and bottom 1/1 mm graduation
• reading from left to right • semi rigid version, with wide cross section • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • up to 2000 mm in a vinyl bag
type B = ½ mm / mm top ½ mm and bottom 1/1 mm graduation reading from right to left • semi rigid version, with wide cross section • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • up to 2000 mm in a vinyl bag
Type D = inch / mm top 1/64 ; 1/32 and 1/16 inch graduation, bottom ½ mm and 1/1 mm • semi rigid version, with wide cross section • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • up to 2000 mm in a vinyl bag
• reading from left to right • graduation on front- and rearside • stainless spring steel • non glare, matt surface • laser engraved scale for a clear reading front top ½ mm and bottom 1/1 mm graduation back top 1/16; 1/32; 1/64 inch – bottom 1/10; 1/20; 1/50; 1/100 inch
• graduation on front- and rearside • reading from left to right • precise, deep laser engraved scale • non-glare, matt surface, with clear reading • carbon spring steel, with black anodized surface
• graduation on front- and rearside • reading from left to right • with two straight ends without whole • precise, deep laser engraved scale • non-glare, matt surface, with clear reading • with detachable magnetic inserts • non-glare, matt surface
• flexible design because of narrow cross section • stainless spring steel – non glare, matt surface • front: top 1/1 mm and bottom 1/1 mm graduation • back: top ½ mm and bottom ½ mm graduation • etched graduation for a clear reading – cm graduation
• reading from left to right • with conversion table on the backside • etched graduation for a clear reading • non glare, matt surface • stainless spring steel
Twist drill with long shank and specially ground roof-like tip, which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations. 800 – 2500 rpm, e.g. Ø 10 mm 2500 rpm in formwork panel. Made in Germany
Twist drill with long shank and specially ground roof-like tip which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations
Twist drill with long shank (SDS-plus) and specially ground roof-like tip which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations
“Lewis” pattern, with crest of thread, one main cutting edge and one taper tap. With lug for wooden handle For drilling deep holes in soft wood (depending on the diameter) and also limited in European hard wood
Brad point drill bit with extra long brad point (ground three-edged), two main cutting edges, two taper taps, four grooves on the spiral.
800 – 2500 rpm e.g. Ø 16 mm 2000 rpm in soft wood
FAMAG 1591 is a German-made HSS brad point drill bit designed for precision in woodworking. Ideal for softwood, European hardwood, and MDF, it’s optimized for cordless screwdrivers, ensuring accurate and clean drilling.
TCT brad point drill bit, cylindrical, two main cutting edges, two taper taps. Spiral form N. 4.000 – 10.000 rpm e.g. Ø 5 mm 8.000 rpm in European hard wood. Further details in the speed diagram.
Premium version, fully ground quality with two main cutting edges and two taper taps. Specially ground spiral for a very good chip removal. 2400 – 8000 rpm e.g. Ø 4 mm 5000 rpm in European hard wood. Further details in the speed diagram
One-piece drill bit (C6,3) with brad point, two main cutting edges, two protruding cutting edges and a hexagonal shank for bit holder (1/4“; C 6,3). Maximum rotation speed of the cordless screwdriver: recommended 3000 rpm
Premium quality version, extra long, fully ground quality with two main cutting edges and two taper taps. Internally ground special spiral for very good chip removal