Returning Customer ?
Don't have an account ?
Showing 586–630 of 860 results
– for ELORA-roller tool cabinets – black, with yellow signal colour – oil and grease resistant – chemical resistant – Width: 41,0 cm, Depth: 18,9 cm – hard foam insert
Water pump pliers WPP-250 is use for tightening round bars, bolts, nuts, etc. The mouth opening can be adjusted in 5 stages according to the size of the object to be grasped. Handle is long, so a large amount of force is applied with a small force. By MCC Japan.
Water pump pliers WPD series. Designed for heavy duty featured by tongue and groove design. The tools made of alloy steel allows you to use with extra pressure on handle.
In black plastic wallet Forged, cutting edge hardened and ground Shaft red coated Lightly conical inside for easy removal of the cuttings High grade steel
High-quality industrial design with short stroke Continuous fixation, air release valve on the pump head Fat lead by means of spring force in the press head Dummy lubrication excluded Made in Germany
The ELORA 890-VG series wrench is crafted for DIN 1804 grooved nuts and DIN 981 bearing nuts. Manufactured in Germany with super-hardened alloy steel, it guarantees accuracy. Featuring a unique hinged nose design, black phosphate finish, and ergonomic handle, it offers efficient handling. Full CO and CQ certifications ensure safety and quality.
An excellent cutter for steel wire rope. Notched blade holds and locks rope in cutting position. Shearing action of blades gives clean, sharp cutting of coarse or fine stranded materials with minimum distortion. Blades interchangeable with bolt cutters.
Suitable for Tool Cabinet ELORA-No. 1100L Suitable for Roller Tool Cabinet Buddy ELORA-No. 1210-L7 Super Caddy ELORA-No. 1220-L7 and L8, ToolJET ELORA-No. 1225-L7 Made in Germany
Rising by 0,5 mm In plastic folding box High true-running accuracy High capacity twist drill bits, completely ground For steel, cast steel, alloyed and non-alloyed (up to 900 N/mm²)
Rising by 0,5 mm In plastic folding box High capacity twist drill bits, completely ground High true-running accuracy 5 % Cobalt content provides additional strength and wear resistance
In plastic case with hard foam insert For cutting internal and external threads M3 to M12 Incl. guides for circular dies According to DIN 352 Made in Germany
German-made soft-faced hammer with a cast zinc head, exchangeable Cellulose-Acetate faces, and a 22-60mm diameter range. It has a 65 shore D hardness rating according to DIN 53505. The hammer features an ash handle for comfort and shock absorption. It’s a durable, versatile tool for precise strikes in various applications.
Face holder made of cast zinc Ash handle Exchangeable faces made of impact resistant desmopan Made in Germany
Engineer’s hammer, German pattern 1665, offers a range of head weights from 100 to 2000g. It features a drop-forged and inductively hardened hammer head with safety collar, a polished face and peen, an ash handle with nylon shaft protection, and mechanical attachment using a steel ring wedge and epoxy resin.
Drop forged hammer head Inductive hardened and coated Face and peen polished Ash handle Mechanically fixed with a ring steel wedge and epoxide resin
Forged hammer head Inductive hardened and coated Face and peen polished Ash handle Mechanically fixed with a steel ring wedge
High-grade tool steel head, nonslip plastic handle, and polished coating. It’s designed for durability, with a 330mm length, 765g weight, and made in Germany for reliable performance. Elora – Made in Germany.
For testing the acid density on conventional batteries with screw caps. Areometers are valuable tools for measuring density or specific gravity, and they find applications in a wide range of industries where precise measurements of liquid density are required.
for external retaining rings acc. to DIN 471, DIN 983 straight jaws, self-opening due to mounted spiral spring gunmetal-finish, ground joint
For external retaining rings acc. to DIN 471, DIN 983 Straight jaws, self-opening due to mounted spiral spring Gunmetal-finish, ground joint Red dip insulated handles ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
– for inside hexagon screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon according to DIN 3126 C 6,3, ISO 1173 – according to DIN ISO 2351-3
– for inside multi-point B&S and XZN screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon according to DIN 3126 C 6,3, ISO 1173
– for RIBE®-CV-screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3126 C 6,3, ISO 1173 – RIBE® = reg. trademark of Richard Bergner GmbH & Co KG, Schwabach
– for TORX Plus® IPR-screws -ELORA-Chrom-Molybdän-Vanadium 73MoV5-2 / 1.2381 -male hexagon according to DIN 3126 C 6,3, ISO 1173 -TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
– for inside TORX® screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon according to DIN 3126 C 6,3, ISO 1173 – TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
– for inside-TORX® safety screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon according to DIN 3126 C 6,3, ISO 1173 – TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
– cross-slotted head screws PH – 1/4″ hexagonal shank – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2/ 1.2381
– for plain slotted screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 -male hexagon drive according to DIN 3126 C 8, DIN ISO 1173 -according to DIN ISO 2351-1
– for inside hexagon screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3126 C 8, DIN ISO 1173 – according to DIN ISO 2351-3
– for cross slotted screws PH – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3126 C 8, DIN ISO 1173 – according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PH
– for cross slotted screws PZ – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon according to DIN 3126 C 8, DIN ISO 1173 – according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PZ
– for inside multi-point B&S and XZN screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3126 C 8, DIN ISO 1173
– for inside TORX® screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3128 C 8, DIN ISO 1173 – TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
– for inside-TORX® safety screws – ELORA Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3126 C 8, DIN ISO 1173 – TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
– bit lock with permanent magnet and quick clamping system – quick locker and ejection system – female hexagon drive according to DIN 3126 D 6,3 – male hexagon drive according DIN 3126 E 6,3, DIN ISO 1173
– bit lock with permanent magnet resp. spring clips – with stainless steel sleeve, diameter 9,5 mm – female hexagon drive according to DIN 3126 D 6,3 – male hexagon drive according DIN 3126 E 6,3 DIN ISO 1173 – according to DIN 7427 Form D
designed for pressing cable end-sleeves, featuring a side cutter and wire stripping mechanism. Made from high-grade steel C45, it’s available in 155mm and 220mm lengths, embodying German precision and durability.
made in Germany, ranging from TX5 to TX24mm. Crafted from Chrome Vanadium, it features both 1/2″ and 3/8″ drives, adheres to DIN 3120 and ISO 1174 standards, and comes in a durable metal box.
Includes bi-hexagon and hexagon sockets, a sliding T-Bar, extension bars, a tommy bar, universal joint, and reversible ratchet head. Hot forged, matte chrome-plated Chrome-Vanadium steel. Available in metric and imperial sizes. Made in Germany.
Threaded rod wrenches ABW are tools used to remove or install materials in the form of threaded rods. This tool can be used in many fields, including construction, mechanics, electronics, and many other applications.
Threaded Rod Sockets BSW are a special type of socket used to clamp steel and iron bars with threads without damaging the threads. The ratchet mechanism is used to quickly and efficiently rotate the threaded rods. By MCC made in Japan.
Teeth additionally inductive hardened – Easy and quick adjusting due to knurled adjustment – Self-locking due to gripping surfaces staggered in reverse order – Made in Germany
Features exchangeable plastic jaws for chrome and nickel-plated fittings, a lever clamp, and is made from durable Elora-Chrome-Vanadium 31 CrV3 / 1.2208. It measures 65mm in span width, 275mm in length, with a polished finish.
Made from durable Chrome-Vanadium, features adjustable jaws and PVC-dip handles for secure grip and protection. Versions include the standard 138, 138-A with plastic jaws, and 138-E replacement jaws. Made in Germany.
To process blind rivets Mandrel intake exchangeable on the head For blind rivets diameters: 2.4, 3.2, 4.0 and 4.8 mm Black, plier body made of aluminium, leverag Made in Germany
