Returning Customer ?
Don't have an account ?
Showing 1–45 of 370 results
ELORA 1582 marking gauge, a precision tool made in Germany, offers accurate measuring and marking capabilities on workpieces. It features a screw lock, hardened marking edge, and matt chrome-plated surface, available in 200mm to 300mm ranges, ensuring precise and clear markings for various manufacturing applications.
FELCO 3.91 10 Swiss-made grafting knife with stainless steel blade, retractable brass bark lifter, red nylon handle. Ideal for budding fruit trees, roses, vines. 100mm length.
• special wear-resistant casting with additionally steel • strong ribbed construction, side surfaces reinforced • measuring surface according to DIN 876 • side surfaces carefully planed or milled • with supporting points, corresponding to the size of plate • against extra charge we supply the plates with handle and with protective wooden cover
• special wear-resistant casting with additionally steel • strong ribbed construction, side surfaces reinforced • measuring surface according to DIN 876 • side surfaces carefully planed or milled
• solid angular steel construction, powder coated, grey (RAL 7001) • 3-point support M 24 x 80 mm • 2 extra support for tipping protection, with adjusting screws • single packed on an Euro-pallet
• mm graduation on bottom edge • without protection-space end, at left side • flat side ground • vertical edges ground • stainless or carbon steel quality available
•quality DIN 866 form A • mm graduation on bottom edge • 5 mm protection space on both ends • flat side finely ground • vertical edges finely ground, can be used as a rule • stainless or carbon steel quality available
The Hydraulic Lifting Wedge HLW 18TI is a versatile and reliable tool with an integrated pump, designed for lifting heavy loads with precision and safety. Its robust construction, ease of use, and space-saving design make it an efficient solution for various lifting applications.
• with 100-step graduation • drum and sleeve matt chrome, frame lacquered, with insulation plates • carbide surfaces lapped, spindle hardened and ground • locking lever for quick and precise fixing • with friction ratchet for constant measuring pressure • with adjustment key, from 25 mm with setting gauge
Premium version, fully ground quality with two main cutting edges and two taper taps. Specially ground spiral for a very good chip removal. 2400 – 8000 rpm e.g. Ø 4 mm 5000 rpm in European hard wood. Further details in the speed diagram
• top quality, for calibration purpose • stainless, hardened and fine ground • scales matt chrome finish • parallaxfree reading by vernier, with large magnifying lens • with fine adjustment
600 – 6000 rpm. e.g. Ø 68 mm 1300 rpm in European hard wood. Further details in the speed diagram
Adjustable with knurled adjustment Forged pieces hardened and tempered Steel-grey, handles blue laquered, polished jaws US-Norm GGG-W-651, class A, Type 1 Teeth additionally inductive hardened and staggered in reverse order
Teeth additionally inductive hardened – Easy and quick adjusting due to knurled adjustment – Self-locking due to gripping surfaces staggered in reverse order – Made in Germany
• reading from left to right • graduation on front- and rearside • stainless spring steel • non glare, matt surface • laser engraved scale for a clear reading front top ½ mm and bottom 1/1 mm graduation back top 1/16; 1/32; 1/64 inch – bottom 1/10; 1/20; 1/50; 1/100 inch
Type B = ½ mm / mm top with 1/2 mm and bottom with 1/1 mm graduation • conform to MID-Code • precise and deep, laser engraved scale, with clear reading • stainless steel, non-glare, matt surface • semi-rigid, with wide cross-section • cm graduation • with identification-no. and certificate of conformity
type A = mm / mm top and bottom with 1/1 mm graduation • conform to MID-Code • precise and deep, laser engraved scale, with clear reading • stainless steel, non-glare, matt surface • semi-rigid, with wide cross-section • cm graduation • with identification-no. and certificate of conformity
type A = mm / mm top and bottom with 1/1 mm graduation graduation right to left • conform to MID-Code • precise, etched scale, with clear reading • stainless steel, non-glare, matt surface • semi-rigid, with wide cross-section • cm graduation • with identification-no. and certificate of conformity
type B = ½ mm / mm top with 1/2 mm and bottom with 1/1 mm graduation • conform to MID-Code • precise, etched scale, with clear reading • stainless steel, non-glare, matt surface • semi-rigid, with wide cross-section • cm graduation • with identification-no. and certificate of conformity
• reading from left to right • metric graduations conform to the tolerance requirements of British Standard (BS 4372:1968) • stainless spring steel, with non glare, matt surface • precise, deep graduation with laser engraved • with identification-no
Type A = mm / mm top and bottom 1/1 mm graduation • reading from left to right • semi rigid version, with wide cross section • stainless spring steel, with non glare, matt surface • precise, deep graduation with laser engraved, continuing numbers • with identification-no. and calibration certificate
Numbering up to 500 mm lenght with continuing mm numbering. The rules from 1000 mm up to 2000 mm lenght with continuing cm numbering. The rules according to EC Class I and are qualified as reference pieces.
type B = ½ mm / mm top ½ mm and bottom 1/1 mm graduation reading from right to left • semi rigid version, with wide cross section • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • up to 2000 mm in a vinyl bag
White Vaseline Acid-Free, specifically for BETEX induction heaters, fills air gaps between the yoke and magnetic core, enhancing efficiency and heat transfer, protecting equipment, and ensuring longevity. It’s easy to apply, non-corrosive, and essential for optimal heater performance.
BETEX HP hydraulic pullers have an integrated pump and cylinder, compact design, strong grip, and are ideal for various applications. They are economical, safe, and versatile with available accessories.
including sizes 8-22 mm, designed for roller tool cabinets. It features durable, chrome-vanadium steel, corrosion resistance, and meets DIN 3113, ISO 3318, and ISO 7738 standards, stored in a hard foam insert.
enabling a 5° swivel angle for operation in confined spaces. It’s made of durable ELORA-Chrome-Vanadium steel, matte chrome-plated for longevity, and housed in a robust ABS case. Adaptable for use as a ratchet.
ELORA MS-2 Combination Spanner Set, made in Germany, includes durable tools crafted from ELORA-Chrome-Vanadium 31CrV3 steel, stored in a stable ABS plastic module with a transparent cover.
Featuring six forged and hardened screwdrivers, the ELORA 583 S6K-ST provides durable tools with stainless steel construction and ergonomic QUATROLIT®-2C grips, packaged in a carton box, totaling 440 grams. Germany.
Offering identical tool compositions, the ELORA 583 S5-K features a lightweight plastic tray, while the 583 S5-K-1 is housed in a heavier cardboard box, each set containing five durable screwdrivers with ergonomic handles. Made in Germany.
feature matt chrome-plated, gunmetal-finished blades, non-slip QUATROLIT®-2C handles, and suspension holes. Both are made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242, adhering to rigorous DIN ISO standards. Made in Germany.
Crafted for convenience, the ELORA 237 allows for easy magnetization and demagnetization of tools such as screwdriver blades, facilitated by its “+” and “-” openings. This cadmium-free tool, built with high-quality yellow plastic and industrial-grade magnets.
Ideal for TORX® screws, the ELORA 573TX screwdriver offers a hard-wearing, chrome-plated blade with a versatile swivel angle, a comfortable QUATROLIT® handle, and gunmetal finished tip, made from ELORA-Chrom-Vanadium steel.
Ideal for tight spaces, the compact ELORA 543-IS screwdriver offers a robust, matt chrome plated blade and a comfortable plastic handle. It’s made from high-grade Chrome-Vanadium steel, meeting DIN ISO 2380-2A and 2380-1 standards for blade and edge.
For cross slotted screws, ELORA 549-PZ screwdrivers feature specialized steel blades, ergonomic QUATROLIT® handles, gunmetal-finished tips, and adherence to DIN ISO 8764 specifications for various sizes.
BETEX WSP 25 tons shop press offers a strong steel frame, 250 mm stroke, multiple position press bed, precise force control, and choice of manual, air, or electric pumps. Accessories included.
BETEX WSP 10 tons presses offer robust steel construction with a 250 mm stroke, versatile positioning, precision control gauges, and multiple pump options, suitable for various professional pressing applications.
ELORA 1553 precision straight-edge rulers come in lengths of 100-500mm, meeting DIN 874 class 00 standards. They feature insulated grips, hardened steel for durability, and are designed for precise surface flatness checks.
ELORA 1554 spirit level features a 0.5 mm/m accuracy, robust rectangular aluminum profile, acrylic vials with a magnifying lens, lateral mm graduation, and a durable plastic-coated surface. Ideal for precise leveling, it’s a sturdy, reliable tool for professionals. Made in Germany.
ELORA 1569 precision steel square features a 90° angle with one long side serving as a planar rule, accuracy grade class 00. It is made of high-strength forged steel and meets the DIN 875 standard. This genuine ELORA product is manufactured in Germany.
ELORA 1552 Straight Aluminium Ruler, with a measuring range from 300 to 1000mm, 50x5mm cross-section, precise millimeter divisions, made from quality aluminium alloy, features a corrosion-resistant anodized surface.