Returning Customer ?
Don't have an account ?
Showing all 36 results
Complying with DIN 3113, Form B, ISO 3318, and ISO 7738 standards, they feature Chrome-Vanadium construction, deep offset ring ends for tight spaces, and matte chrome plating for durability and aesthetics. Made in Germany.
In black plastic holder. Cranked Long version, both ends fit same nut size Jaw polished, shaft matt chrome plated ELORA-Chrome-Vanadium 31CrV3 / 1.2208 According to DIN 3113, Form B, ISO 3318, ISO 7738
The magnetic yoke is of the same length dimension of 500mm, constructed from laminated thin magnetic sheets. Depending on the diameter of the component requiring heating, you will select the most appropriate cross-section of the magnetic yoke. Compatible with BLF 205 – SLF 305. Manufactured in the Netherlands.
Open-End Spanner Insert Tools, ranging from ELORA-Nr. 2052-14 to 2052-19 and 2056-27 to 2056-41, are versatile and adaptable tools designed for various applications. They offer strength, durability, and customizable settings, making them valuable assets for both professionals and DIY enthusiasts. Made in Germany.
ELORA 1495 bench vice offers a 140-205mm opening, hardened anvil surface, large spanning depth, strong trapezoid threaded spindle, readjustable guide, milled jaws, and a black coating. It’s drop-forged from high-grade tool steel for enhanced durability.
Hook Wrench set for grooved nuts according to DIN 1804, anti-friction bearing bolt, according to DIN 981. Rounded edges for better handling. high grade tool steel. DIN 1810, Form A
The combination spanner set is crafted in Germany from Chrome-Vanadium 31CrV3 steel, featuring dual-end fit, cranked design, and corrosion-resistant finish, housed in a plastic pouch with compliance to DIN 3113, Form B, ISO 3318, and ISO 7738.
According to DIN 3113 form B standards, features a long version design, ELO-DRIVE profile for high force transmission without fastener damage, made of ELORA-Chrome-Vanadium for durability. Made in Germany.
The BETEX BLF 205 is a powerful, mobile induction heater with a 12kVA capacity, handling up to 400 kg. It features digital display, customizable yokes, and automatic demagnetization.
The Electr. Digital Anemometer 0.3 ~ 30 m/s is a state-of-the-art device designed to cater to a wide range of professionals and outdoor enthusiasts. With its exceptional capabilities and robust features, it is the go-to solution for measuring wind speed in various units and under diverse conditions.
– very light, good handling, midsection lacquered – high accuracy- and pliability-values – HC-coated and compressed, coating thickness 50µ ± 5µ. – quality DIN 874 page 1, accuracy GG 0, GG 1 or GG 2.
Rapid drilling in soft wood, European hard wood, chipboard, MDF etc. Rapid chipping of solid wood and chipboards. Clearly less effort is needed and boring is more rapid than with the usual Forstner bit
certified to 1000V, features a 45-degree angled nose, dual-component insulation, and is made from chrome-nickel coated C45 steel for durability and corrosion resistance. Made in Germany, it meets EN 60900/IEC 60900 standards.
“Lewis” pattern, crest of thread, main cutting edge and taper tap in premium quality. Version with stepped head and hexagonal shank from Ø 8mm.
500 – 2800 rpm. e.g. Ø 12 mm 2000 rpm in soft wood. Further details in the speed diagram
ELORA 930- VDE snipe nose pliers feature serrated grip, burner hole, side cutter, inductive hardened blades, QUATROLIT®-2C handles, VDE insulated to 1,000V, DIN ISO 5745 compliant, made in Germany.
• large measuring range • with adjustable anvil • with lightmetal frame • with 50 mm spindle revolution
The high-quality ELORA 890-Series hook wrench, compliant with DIN 1810 Form A standards and made in Germany, is designed for loosening/tightening DIN 1804 grooved nuts and DIN 981 antifriction bearing bolts. It features a convenient design, a robust one-piece construction, and adherence to industrial standards. ELORA Germany.
• reading from left to right • semi rigid version, with wide cross section • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • up to 2000 mm in a vinyl bag
Non-sparking striking ring wrench 0100S AlCu alloy material. DIN 7444 standard, load-bearing beam-type die-cast body. The wide handle is easy to close. Used for petroleum, chemical environment. Elora Germany. Nationwide Delivery.
It features carbide tips, two cutting edges, and two spurs. Precisely ground with a diamond wheel, it provides tear-free, accurate drillings in hard wood, chipboards, and plastics. It offers an effortless drilling experience and is recommended for stationary use.
Head-Length: 90 – 140mm Length: 320 – 380mm With 2 flat faces and ash handle According to DIN 5128-90, 90 Shore A Spare heads on request
• for adjusting, levelling etc. • rolled in a rugged plastic box or as stripes in a case with 10 or 5 blades • different material in different width and different length available
Premium quality version, extra long, fully ground quality with two main cutting edges and two taper taps. Internally ground special spiral for very good chip removal
ELORA 891 – high-quality German-made hook wrench with a pin designed for DIN 1810 Form B standard nuts. Crafted from super-hardened steel. Its rounded design ensures comfortable grip and control during tightening, especially for nuts with radial holes. The surface is sandblasted to increase friction, ensuring safety and precise fastening.
ELORA 960 VDE combination pliers feature insulated handles, German pattern, lay-on cutter box, inductive hardened blades with 63-64 HRC, for medium hard/steel wires, serrated grip, in three sizes: 165mm, 185mm, 205mm.
BESSEY LMU Light Duty Bar Clamp U-Style offers up to 1,500 N clamping force, features step-over clamping for hard-to-reach areas, and has a durable, lightweight design with protective caps for delicate workpieces.
• on a metal ring • for adjusting the valves at narrow spaces and to reach difficult positions, etc. • blades made from stainless steel, hard rolled out • cylindrical shaped blades, 13 mm width
Twist drill made of HSS, fully ground from the solid, long version, cylindrical, special spiral for good chip removal when drilling deep holes and for greasing materials. Profile crosswise sharpened acc. to DIN 1412C, point angle 135°. Tolerance of diameter h8
It’s made of high-quality carbon steel with a 13mm width, is designed for precise gap measurements. It features rounded tips for safety and comes in various blade lengths and quantities, stored in a nylon bag for optimal condition.
type B = ½ mm / mm top ½ mm and bottom 1/1 mm graduation reading from right to left • semi rigid version, with wide cross section • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • up to 2000 mm in a vinyl bag
precision tools available in matched pairs with a 90° large cut. They come in milled or ground versions, with three accuracy grades (±0.008 mm to ±0.064 mm) and five sizes for diverse applications. VOGEL Germany
The BETEX iDuctor induction pad, made in the Netherlands, is designed for paint and adhesive removal, compatible with iDuctor 1 and 2, featuring a 3.5 mm wire thickness and a max temperature of 150°C.