Returning Customer ?
Don't have an account ?
Showing all 32 results
Long jaws, serrated gripping surface Ground, with red dip insulated handles ELORA-high grade tool steel C45 / 1.0503 According to DIN ISO 5745 Made in Germany
High-grade tool steel head, nonslip plastic handle, and polished coating. It’s designed for durability, with a 330mm length, 765g weight, and made in Germany for reliable performance. Elora – Made in Germany.
German-made soft-faced hammer with a cast zinc head, exchangeable Cellulose-Acetate faces, and a 22-60mm diameter range. It has a 65 shore D hardness rating according to DIN 53505. The hammer features an ash handle for comfort and shock absorption. It’s a durable, versatile tool for precise strikes in various applications.
Depth Stop made of resistant ABS plastic. Depth stop supported by ball bearing for FAMAG-Forstner bits with exchangeable guide bushings. Made in Germany.
Wire stripper with insulated handles, features self-opening spring, V-shaped jaws for precise stripping, adjustable jaw opening, chrome-plated with QUATROLIT®-2C nonslip handles, VDE insulated for electrical safety, made from high-grade tool steel.
FAMAG 1591 is a German-made HSS brad point drill bit designed for precision in woodworking. Ideal for softwood, European hardwood, and MDF, it’s optimized for cordless screwdrivers, ensuring accurate and clean drilling.
Designed for removing oil filters and clamping round parts up to 160 mm in diameter. It features a non-slip fiber ribbon, a comfortably plastic-coated grip, and is made from durable, high-grade tool steel. Made in Germany.
Head-Length: 90 – 140mm Length: 320 – 380mm With 2 flat faces and ash handle According to DIN 5128-90, 90 Shore A Spare heads on request
– Alkitronic® EAF: Battery driven 2-speed torque multiplier from 160 Nm to 6,000 Nm / 120 lbf.ft to 4,430 lbf.ft. – Short fastening cycles: Fast gear for run down and power gear for highest torques and precision.
Two straight main cutting edges with chip breaking flutes. With stepped cylindrical shank Ø 13 or 16 mm.
2200 – 4000 rpm. e.g. Ø 16 mm 2200 rpm in soft wood. Further details in the speed diagram
ELORA 950 series VDE Universal Side Cutters offer high cutting performance, inductive hardening for stability, 63-65 HRC edge hardness, VDE insulated handles, and are made from tool steel C45 in Germany.
Aluminium construction tripod – Tripod legs have spikes to ensure good stability. Rapid locking mechanism for aligning the tripod quickly, even on uneven ground. Stabila Germany.
For highest operational demands Inductive hardened cutting blades Cutting blades hardness 61-63 HRC Gunmetal-finish, ground head ELORA-high grade tool steel C45 / 1.0503
designed for pressing cable end-sleeves, featuring a side cutter and wire stripping mechanism. Made from high-grade steel C45, it’s available in 155mm and 220mm lengths, embodying German precision and durability.
For power tools, special steel, phosphated. Female square drive according to DIN 3121-H 63, ISO1174, according to DIN 3129, ISO 2725-2
Fervi M023 milling machine vice features a 360° swivel base, interchangeable hardened steel jaws, precision-ground sliding parts, and a fully covered screw. It’s packaged securely, suitable for mills and drill presses, and comes in various sizes with different jaw openings and dimensions.
Two spiraled main cutting edges in fully ground quality with stepped cylindrical shank Ø 13 or 16 mm.
2500 – 5000 rpm. e.g. Ø 16 mm 2500 rpm in soft wood. Further details in the speeddiagram
The ELORA 86 Ring Slogging Spanner, meeting DIN 7444 standards. It’s designed for heavy-duty applications, boasting sand-blasted surface treatment, a wide size range, and a unique 12-point design for secure gripping and reduced slippage. This German-made tool excels in challenging industrial and construction environments, prioritizing safety and efficiency.
The ELORA 87 is a high-quality open end slogging spanner. It’s forged for durability, featuring a slip-resistant sand-blasted surface. It comes in various sizes to accommodate different fasteners and adheres to DIN 133 standards. While sturdy and versatile, its weight and size limitations are worth considering for specific applications.
Traditional Forstner bit with centre point, two main cutting edges and two circumferential cutters. Low friction due to the reduced peripheral cutting edge
Drop forged hammer head Inductive hardened and coated Face and peen polished Ash handle Mechanically fixed with a ring steel wedge and epoxide resin
With brad point, two main cutting edges and protruding cutting edges. 1000 – 5000 rpm e.g. Ø 5 mm 5000 rpm in softwood. Further details in the speed diagram
• Heat-treated and chrome-plated hydraulic rod provides longer seal life and optimum performance. • Internal safety valve prevents toe jack being used beyond its rated capacity
Made from high-grade steel C45, feature cutting edge hardness of 63-64 HRC, suitable for medium and hard wires, available in sizes 160mm, 180mm, 200mm. Made in Germany.
Universal pullers with 2 sliding legs 317 Series. For pulling off ball bearings, gear-wheels, discs, etc. Heavy-duty bearing pullers, forged pattern, 2 arms. There are 6 models with open jaws differences. ELORA – Made in Germany.
Premium version, fully ground quality with two main cutting edges and two taper taps. Specially ground spiral for a very good chip removal. 2400 – 8000 rpm e.g. Ø 4 mm 5000 rpm in European hard wood. Further details in the speed diagram
designed for 3-arm hydraulic pullers, offer a unique, patented design for maximum spread and even force distribution. Suitable for various shaft diameters, these plates ensure safe, efficient bearing handling without damage, available in four sizes for diverse applications.