Returning Customer ?
Don't have an account ?
Showing all 44 results
High-grade tool steel head, nonslip plastic handle, and polished coating. It’s designed for durability, with a 330mm length, 765g weight, and made in Germany for reliable performance. Elora – Made in Germany.
German-made soft-faced hammer with a cast zinc head, exchangeable Cellulose-Acetate faces, and a 22-60mm diameter range. It has a 65 shore D hardness rating according to DIN 53505. The hammer features an ash handle for comfort and shock absorption. It’s a durable, versatile tool for precise strikes in various applications.
– Alkitronic® EAF: Battery driven 2-speed torque multiplier from 160 Nm to 6,000 Nm / 120 lbf.ft to 4,430 lbf.ft. – Short fastening cycles: Fast gear for run down and power gear for highest torques and precision.
Depth Stop made of resistant ABS plastic. Depth stop supported by ball bearing for FAMAG-Forstner bits with exchangeable guide bushings. Made in Germany.
Wire stripper with insulated handles, features self-opening spring, V-shaped jaws for precise stripping, adjustable jaw opening, chrome-plated with QUATROLIT®-2C nonslip handles, VDE insulated for electrical safety, made from high-grade tool steel.
For highest operational demands Inductive hardened cutting blades Cutting blades hardness 61-63 HRC Gunmetal-finish, ground head ELORA-high grade tool steel C45 / 1.0503
Long jaws, serrated gripping surface Ground, with red dip insulated handles ELORA-high grade tool steel C45 / 1.0503 According to DIN ISO 5745 Made in Germany
certified to 1000V, features a 45-degree angled nose, dual-component insulation, and is made from chrome-nickel coated C45 steel for durability and corrosion resistance. Made in Germany, it meets EN 60900/IEC 60900 standards.
High-performance, stable, 63-65 HRC side cutter. Cuts hardened steel wire (2300 N/mm²) effortlessly. Chrome-plated, polished, with nonslip handles. VDE insulated (up to 1,000V). Durable C45 steel. Safety compliant (EN/IEC 60900).
Aluminium construction tripod – Tripod legs have spikes to ensure good stability. Rapid locking mechanism for aligning the tripod quickly, even on uneven ground. Stabila Germany.
ELORA 930- VDE snipe nose pliers feature serrated grip, burner hole, side cutter, inductive hardened blades, QUATROLIT®-2C handles, VDE insulated to 1,000V, DIN ISO 5745 compliant, made in Germany.
FAMAG 1591 is a German-made HSS brad point drill bit designed for precision in woodworking. Ideal for softwood, European hardwood, and MDF, it’s optimized for cordless screwdrivers, ensuring accurate and clean drilling.
VDE wire stripper features self-adjusting blades for 0.5-5.0 mm wires, QUATROLIT®-2C handles, VDE insulation up to 1,000V, made from tool steel C45, 160mm length, 216g, Made in Germany.
Designed for removing oil filters and clamping round parts up to 160 mm in diameter. It features a non-slip fiber ribbon, a comfortably plastic-coated grip, and is made from durable, high-grade tool steel. Made in Germany.
ELORA 960 VDE combination pliers feature insulated handles, German pattern, lay-on cutter box, inductive hardened blades with 63-64 HRC, for medium hard/steel wires, serrated grip, in three sizes: 165mm, 185mm, 205mm.
Heavy duty foot vises are made from tough ductile iron with easily replaceable jaws of hardened high carbon steel. Portable and stable grip for piping work on the ground instead of two pipe wrenches.
Screwdriver Socket 1/2″ 3200-IS by Elora is ideal for plain slotted screws, featuring a chrome-plated, polished finish, knurled grip, and high-quality materials. It complies with industry standards and ensures reliable performance for professionals. Made in Germany.
Head-Length: 90 – 140mm Length: 320 – 380mm With 2 flat faces and ash handle According to DIN 5128-90, 90 Shore A Spare heads on request
• Heat-treated and chrome-plated hydraulic rod provides longer seal life and optimum performance. • Internal safety valve prevents toe jack being used beyond its rated capacity
Two straight main cutting edges with chip breaking flutes. With stepped cylindrical shank Ø 13 or 16 mm.
2200 – 4000 rpm. e.g. Ø 16 mm 2200 rpm in soft wood. Further details in the speed diagram
German-made, are ideal for gripping materials in tight spaces. They feature long, slim jaws, quick-release levers, and are drop-forged, nickel-plated. Available in three sizes, they’re strong and versatile.
Two spiraled main cutting edges in fully ground quality with stepped cylindrical shank Ø 13 or 16 mm.
2500 – 5000 rpm. e.g. Ø 16 mm 2500 rpm in soft wood. Further details in the speeddiagram
ELORA 950 series VDE Universal Side Cutters offer high cutting performance, inductive hardening for stability, 63-65 HRC edge hardness, VDE insulated handles, and are made from tool steel C45 in Germany.
Traditional Forstner bit with centre point, two main cutting edges and two circumferential cutters. Low friction due to the reduced peripheral cutting edge
– for plain slotted screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon according to DIN 3126 C 6,3, DIN ISO 1173 – according to DIN ISO 2351-1
Drop forged hammer head Inductive hardened and coated Face and peen polished Ash handle Mechanically fixed with a ring steel wedge and epoxide resin
High cutting performance with minimal effort Cutting edge hardness: 63-65 HRC Chrome-plated, polished Maximum stability under load by additional inductive hardening For hardened steel wire, piano wire (tensile strength 2300 N/mm²)
For power tools, special steel, phosphated. Female square drive according to DIN 3121-H 63, ISO1174, according to DIN 3129, ISO 2725-2
designed for pressing cable end-sleeves, featuring a side cutter and wire stripping mechanism. Made from high-grade steel C45, it’s available in 155mm and 220mm lengths, embodying German precision and durability.
The premium ELORA 890-V series wrench is designed to work with DIN 1804 grooved nuts and DIN 981 bearing nuts. Manufactured in Germany, using specially forged high-quality steel and smart design, this wrench ensures precision and convenience during work. It is available in various sizes to suit different applications.
Fervi M023 milling machine vice features a 360° swivel base, interchangeable hardened steel jaws, precision-ground sliding parts, and a fully covered screw. It’s packaged securely, suitable for mills and drill presses, and comes in various sizes with different jaw openings and dimensions.
Made from high-grade steel C45, feature cutting edge hardness of 63-64 HRC, suitable for medium and hard wires, available in sizes 160mm, 180mm, 200mm. Made in Germany.
The ELORA 86 Ring Slogging Spanner, meeting DIN 7444 standards. It’s designed for heavy-duty applications, boasting sand-blasted surface treatment, a wide size range, and a unique 12-point design for secure gripping and reduced slippage. This German-made tool excels in challenging industrial and construction environments, prioritizing safety and efficiency.
The ELORA 470BI Snipe Nose Pliers feature high-grade C45 tool steel, serrated gripping surface, side cutter, inductive hardened blades, nonslip QUATROLIT®-2C handles, chrome-plated finish, and comply with DIN ISO 5745. Made in Germany.
The ELORA 87 is a high-quality open end slogging spanner. It’s forged for durability, featuring a slip-resistant sand-blasted surface. It comes in various sizes to accommodate different fasteners and adheres to DIN 133 standards. While sturdy and versatile, its weight and size limitations are worth considering for specific applications.
Universal pullers with 2 sliding legs 317 Series. For pulling off ball bearings, gear-wheels, discs, etc. Heavy-duty bearing pullers, forged pattern, 2 arms. There are 6 models with open jaws differences. ELORA – Made in Germany.
– for holding and bending – short jaws, serrated gripping surface – chrome plated, polished, with nonslip QUATROLIT®-2C-handles – Plier acc. to DIN ISO 5745 – handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900 – ELORA-high grade tool steel C45 / 1.0503
With brad point, two main cutting edges and protruding cutting edges. 1000 – 5000 rpm e.g. Ø 5 mm 5000 rpm in softwood. Further details in the speed diagram
Premium version, fully ground quality with two main cutting edges and two taper taps. Specially ground spiral for a very good chip removal. 2400 – 8000 rpm e.g. Ø 4 mm 5000 rpm in European hard wood. Further details in the speed diagram
designed for 3-arm hydraulic pullers, offer a unique, patented design for maximum spread and even force distribution. Suitable for various shaft diameters, these plates ensure safe, efficient bearing handling without damage, available in four sizes for diverse applications.