Spare Blade for VC-03 Series Plastic Pipe Cutters , MCC-Made in Japan

WARNING
SHARP! Do not touch the blade edge with a finger or hand. Wear protective gloves during use.
In order to avoid damage to the blade, Do not modify or grind the blade edge.

CAUTION
Thess replacement blade is only for VC-03 series. Do not use on other products.
Use of an improper blade may be hezardous.

How to Replace the Blade for Plastic Pipe Cutters

Plastic pipe cutters are essential tools for cutting plastic pipes with precision. Over time, the blade may become dull and require replacement. Here is a step-by-step guide on how to replace the blade for plastic pipe cutters:

Note: Before starting the blade replacement process, ensure that you have the appropriate spare blade for your specific model of plastic pipe cutter.

Tools and materials needed:
– Spare blade suitable for your plastic pipe cutter model
– Flat-head screwdriver
– Protective gloves

Step 1: Prepare for Blade Replacement
Ensure that the plastic pipe cutter is not engaged or in use. Make sure to wear protective gloves to prevent any accidental injury.

Step 2: Open the Blade
Locate the handle (L) on the plastic pipe cutter. Open the blade by unlocking the handle. This will separate the blades and expose the blade assembly.

Step 3: Detach the Coil Spring
Using a flat-head screwdriver, carefully detach the coil spring from the blade assembly. Gently pry the coil spring away from the blade, ensuring not to damage the blade or spring in the process.

Step 4: Remove the Blade Bolt
Locate the blade bolt that holds the blade in place. Using the appropriate size screwdriver, loosen and remove the blade bolt. Set it aside in a safe place for later reassembly.

Step 5: Replace the Blade
Take the new spare blade that matches your plastic pipe cutter model. Align the holes on the blade with the corresponding holes on the blade assembly. Insert the blade into the assembly, ensuring it fits securely.

Step 6: Secure the Blade
Once the new blade is in position, reattach the blade bolt and tighten it securely. Ensure that the blade is firmly held in place, but be cautious not to overtighten and damage the blade or blade assembly.

Step 7: Reattach the Coil Spring
Using the flat-head screwdriver, gently push the coil spring back into position, ensuring it properly engages with the blade assembly. Double-check that the coil spring is securely attached and functional.

Step 8: Test and Verify
Close the blade by locking the handle (L) of the plastic pipe cutter. Perform a test cut on a scrap piece of plastic pipe to verify that the blade replacement was successful. Ensure that the blade cuts smoothly and cleanly through the pipe.

Important Safety Reminders:
– The blade is sharp, so avoid touching the blade edge with your fingers or hands. Always wear protective gloves during use.
– Do not attempt to modify or grind the blade edge, as it may result in damage or compromised cutting performance.
– Only use the replacement blade specifically designed for your plastic pipe cutter model. Using an improper blade can be hazardous and may lead to accidents or damage to the tool.

Following these steps will guide you through the process of replacing the blade for your plastic pipe cutter, ensuring that it remains in optimal working condition for accurate and efficient pipe cutting.