Returning Customer ?
Don't have an account ?
Showing 676–720 of 905 results
• triple-jointed arm with central mechanical clamping • all joints are clamped with just one twist grip • ball joints allow a fast and safe positioning
• special wear-resistant casting with additionally steel • strong ribbed construction, side surfaces reinforced • measuring surface according to DIN 876 • side surfaces carefully planed or milled • with supporting points, corresponding to the size of plate • against extra charge we supply the plates with handle and with protective wooden cover
• special wear-resistant casting with additionally steel • strong ribbed construction, side surfaces reinforced • measuring surface according to DIN 876 • side surfaces carefully planed or milled
• solid or ribbed construction • special wear resistant steel casting • surfaces and four sides fine planed • against extra charge the plates can be supplied also with bores, holes or T-slots
• solid angular steel construction, powder coated, grey (RAL 7001) • 3-point support M 24 x 80 mm • 2 extra support for tipping protection, with adjusting screws • single packed on an Euro-pallet
• especially for maintenance and service tasks for lifts • special set for lift and wire/cable measurement • with LCD display for optical or mechanical speed detection
For testing the acid density on conventional batteries with screw caps. Areometers are valuable tools for measuring density or specific gravity, and they find applications in a wide range of industries where precise measurements of liquid density are required.
• for checking and transferring angles • large LCD display with clear reading, digit height 10 mm • blades in anodized aluminium with profile grooves, and embedded magnet strips • On/Off button and data hold function, with fixing screw • 180° rotating display, by pressing function button
• top quality, for calibration purpose • stainless, hardened and fine ground • scales matt chrome finish • parallaxfree reading by vernier, with large magnifying lens • with fine adjustment
Universal Bevel Protractor Set offers a reliable and precise solution for measuring angles. With its three blades of different lengths, stainless steel construction, fine adjustment capability, and parallax-free reading.
for external retaining rings acc. to DIN 471, DIN 983 straight jaws, self-opening due to mounted spiral spring gunmetal-finish, ground joint
For external retaining rings acc. to DIN 471, DIN 983 Straight jaws, self-opening due to mounted spiral spring Gunmetal-finish, ground joint Red dip insulated handles ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
– for inside hexagon screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon according to DIN 3126 C 6,3, ISO 1173 – according to DIN ISO 2351-3
– for inside multi-point B&S and XZN screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon according to DIN 3126 C 6,3, ISO 1173
– for RIBE®-CV-screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3126 C 6,3, ISO 1173 – RIBE® = reg. trademark of Richard Bergner GmbH & Co KG, Schwabach
– for TORX Plus® IPR-screws -ELORA-Chrom-Molybdän-Vanadium 73MoV5-2 / 1.2381 -male hexagon according to DIN 3126 C 6,3, ISO 1173 -TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
– for inside TORX® screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon according to DIN 3126 C 6,3, ISO 1173 – TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
– for inside-TORX® safety screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon according to DIN 3126 C 6,3, ISO 1173 – TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
– cross-slotted head screws PH – 1/4″ hexagonal shank – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2/ 1.2381
– for plain slotted screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 -male hexagon drive according to DIN 3126 C 8, DIN ISO 1173 -according to DIN ISO 2351-1
– for inside hexagon screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3126 C 8, DIN ISO 1173 – according to DIN ISO 2351-3
– for cross slotted screws PH – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3126 C 8, DIN ISO 1173 – according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PH
– for cross slotted screws PZ – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon according to DIN 3126 C 8, DIN ISO 1173 – according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PZ
– for inside multi-point B&S and XZN screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3126 C 8, DIN ISO 1173
– for inside TORX® screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3128 C 8, DIN ISO 1173 – TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
– for inside-TORX® safety screws – ELORA Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3126 C 8, DIN ISO 1173 – TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
– bit lock with permanent magnet and quick clamping system – quick locker and ejection system – female hexagon drive according to DIN 3126 D 6,3 – male hexagon drive according DIN 3126 E 6,3, DIN ISO 1173
– bit lock with permanent magnet resp. spring clips – with stainless steel sleeve, diameter 9,5 mm – female hexagon drive according to DIN 3126 D 6,3 – male hexagon drive according DIN 3126 E 6,3 DIN ISO 1173 – according to DIN 7427 Form D
designed for pressing cable end-sleeves, featuring a side cutter and wire stripping mechanism. Made from high-grade steel C45, it’s available in 155mm and 220mm lengths, embodying German precision and durability.
Screw pitch gauges measure thread pitch, offering diverse models for metric, Whitworth, and American standard threads (UNC, UNF, SAE). Each gauge has specific blades and ranges, essential for mechanical engineering and manufacturing applications.
• for testing of raised and recessed curves • concave and convex shaped blades • fine cutted forms
• matt chrome finish • for testing of raised and recessed curves • concave and convex shaped blades • each blade with 5 measuring points
• with data output RS 232 C • stainless steel, hardened and ground • LCD display with clear reading, zero-setting at any position • On/Off button, reading switchable mm/inch
made in Germany, ranging from TX5 to TX24mm. Crafted from Chrome Vanadium, it features both 1/2″ and 3/8″ drives, adheres to DIN 3120 and ISO 1174 standards, and comes in a durable metal box.
Includes bi-hexagon and hexagon sockets, a sliding T-Bar, extension bars, a tommy bar, universal joint, and reversible ratchet head. Hot forged, matte chrome-plated Chrome-Vanadium steel. Available in metric and imperial sizes. Made in Germany.
• for adjusting, levelling etc. • rolled in a rugged plastic box or as stripes in a case with 10 or 5 blades • different material in different width and different length available
Teeth additionally inductive hardened – Easy and quick adjusting due to knurled adjustment – Self-locking due to gripping surfaces staggered in reverse order – Made in Germany
Features exchangeable plastic jaws for chrome and nickel-plated fittings, a lever clamp, and is made from durable Elora-Chrome-Vanadium 31 CrV3 / 1.2208. It measures 65mm in span width, 275mm in length, with a polished finish.
Made from durable Chrome-Vanadium, features adjustable jaws and PVC-dip handles for secure grip and protection. Versions include the standard 138, 138-A with plastic jaws, and 138-E replacement jaws. Made in Germany.
To process blind rivets Mandrel intake exchangeable on the head For blind rivets diameters: 2.4, 3.2, 4.0 and 4.8 mm Black, plier body made of aluminium, leverag Made in Germany
ELORA 67E made from Chrome-Vanadium in Germany, features a 45° angled head, self-locking mechanism, and durable construction. Available in multiple sizes, it is ideal for demanding tasks.
Durable Swedish-type pipe wrenches with a 3-point S-jaw, self-locking mechanism, and red lacquered finish, designed for professional use in various sizes and conforming to DIN ISO 5234 standards.
