Returning Customer ?
Don't have an account ?
Showing all 35 results
FELCO 200C-60 loppers feature 60 cm length, straight cutting head, carbon fiber and forged aluminum handles, ultra-sharp replaceable blade, ergonomic grips, rubber shock absorbers, adjustable cutting head, and Swiss-made quality.
• suitable for Control- and Testing Plates • from about 1200×800 mm size we recommend single supporting feets • solid steel construction • for a working height of approx. 800 mm
– very light, good handling, midsection lacquered – high accuracy- and pliability-values – HC-coated and compressed, coating thickness 50µ ± 5µ. – quality DIN 874 page 1, accuracy GG 0, GG 1 or GG 2.
acc. to workshop grade • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • graduation reading from left to right, zero-point in the middle • top and bottom 1/1 mm graduation
It’s made of high-quality carbon steel with a 13mm width, is designed for precise gap measurements. It features rounded tips for safety and comes in various blade lengths and quantities, stored in a nylon bag for optimal condition.
For standard purposes, like thickness measuring between narrow slots and for automotive and engine industry. Hardened spring steel, conical shaped blades, 100mm lenght.
Type D = inch / mm top 1/64 ; 1/32 and 1/16 inch graduation, bottom ½ mm and 1/1 mm • semi rigid version, with wide cross section • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • up to 2000 mm in a vinyl bag
Type A = mm / mm top and bottom 1/1 mm graduation • reading from left to right • semi rigid version, with wide cross section • stainless spring steel, with non glare, matt surface • precise, deep graduation with laser engraved, continuing numbers • with identification-no. and calibration certificate
• edges and flat sides extra fine ground • stainless and carbon steel quality available • incl. calibration certificate • from up 2000 mm length shaped in I-form, with hand slots
Precision Straight Edge Form B, steel, accuracy GG 0, DIN 874 page 1. Extra fine ground edges and flat sides. Carbon steel, I-form shape with hand slots. Available from 2000 mm length. Includes calibration certificate.
Precision Straight Edge DIN 874, made of steel with GG 0 accuracy, features an I-form design, weight-reducing holes, extra finely ground measuring surfaces, and includes a calibration certificate. Vogel Germany
• special wear-resistant casting with additionally steel • strong ribbed construction, side surfaces reinforced • measuring surface according to DIN 876 • side surfaces carefully planed or milled • with supporting points, corresponding to the size of plate • against extra charge we supply the plates with handle and with protective wooden cover
• top model for industry purposes • with glass rail for more accuracy • spray water proof acc. to DIN 40050 / IEC 60529 • with duo data output (connectivity also for Digimatic measuring devices)
• flexible design because of narrow cross section • stainless spring steel – non glare, matt surface • front: top 1/1 mm and bottom 1/1 mm graduation • back: top ½ mm and bottom ½ mm graduation • etched graduation for a clear reading – cm graduation
Type B = ½ mm / mm top ½ mm and bottom 1/1 mm graduation • reading from left to right • semi rigid version, with wide cross section • stainless spring steel, with non glare, matt surface • precise, deep graduation with laser engraved, continuing numbers • with identification-no. and calibration certificate
precision tools available in matched pairs with a 90° large cut. They come in milled or ground versions, with three accuracy grades (±0.008 mm to ±0.064 mm) and five sizes for diverse applications. VOGEL Germany
• special wear-resistant casting with additionally steel • strong ribbed construction, side surfaces reinforced • measuring surface according to DIN 876 • side surfaces carefully planed or milled
type B = ½ mm / mm top ½ mm and bottom 1/1 mm graduation reading from right to left • semi rigid version, with wide cross section • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • up to 2000 mm in a vinyl bag
• reading from left to right • with conversion table on the backside • etched graduation for a clear reading • non glare, matt surface • stainless spring steel
• on a metal ring • for adjusting the valves at narrow spaces and to reach difficult positions, etc. • blades made from stainless steel, hard rolled out • cylindrical shaped blades, 13 mm width
• graduation on front- and rearside • reading from left to right • with two straight ends without whole • precise, deep laser engraved scale • non-glare, matt surface, with clear reading • with detachable magnetic inserts • non-glare, matt surface
acc. to DIN 2014/32/EU • reading from left to right or right to left • precise, deep graduation laser engraved, continuing numbers • non glare, matt surface • stainless spring steel • with identification-no
• accuracy acc. to DIN 874 page 1, accuracy GG 0 • made of steel • shaped in I-form • with weight reducing holes
• for simple workshop use • made of steel • chromed version • type A = without graduation • graduation black etched, bevel edge matt chrome finish
• for simple workshop use • made of steel • chromed version • type A = without graduation, type B = with mm graduation • graduation black etched, bevel edge matt chrome finish
The GG 2 accuracy grade as defined in DIN 874 refers to a general level of precision suitable for various applications where extremely high accuracy is not needed. VOGEL Germany.
•quality DIN 866 form A • mm graduation on bottom edge • 5 mm protection space on both ends • flat side finely ground • vertical edges finely ground, can be used as a rule • stainless or carbon steel quality available
• mm graduation on bottom edge • without protection-space end, at left side • flat side ground • vertical edges ground • stainless or carbon steel quality available
• reading from left to right • semi rigid version, with wide cross section • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • up to 2000 mm in a vinyl bag
Never judge a FELCO tool by its size. This is a small, lightweight, easily transported lopper that thinks and acts big, without ever sacrificing FELCO’s trademark precision – here enhanced by the option of interchangeable handles. The FELCO 200A lopper dispels any considerations of size you might have as quickly and easily cuts through a 35mm / 1.18 inch branch.