Returning Customer ?
Don't have an account ?
Showing 1–45 of 46 results
They feature no die stalling, precise start-cutting, easy threading, and excellent chip flow for clean threads, ensuring perfect pipe centering and efficient operation. Made in Germany
German-made VDE Voltage Tester for 100-250V AC with a contact sensor, zinc-coated blade, and a practical clip. It complies with DIN VDE 0680 Teil 6 1977-02, ensuring high safety standards for electrical testing tools.
Featuring sizes R ⅛ LH to R 2 LH. Advanced design ensures easy start-cutting, no stalling, perfect centering, and clean threads, distinguishing left-hand from right-hand threads by tightening direction. Made in Germany.
Traditional cylinder boring bit with centre point, two main cutting edges and two taper taps. 700 – 3000 rpm. e.g. Ø 15 mm 2300 rpm in soft wood. Further details in the speed diagram
BETEX AHP Aluminium hand pumps offer rugged, lightweight construction, easy use, double-acting efficiency, overload protection, and are available in sets with accessories for immediate application.
BETEX ADHC cylinders: lightweight aluminum, hollow, double-acting, 30-60 ton capacity, 50-250 mm stroke, 700 bar pressure, steel piston, chrome-plated center hole, carrying handles, hard-anodized coating, piston blow-out protection.
ELORA 1570 engineer steel square is an L-shaped 90º precision tool, without a base, specifically crafted for high precision in mechanical processing and woodworking. Made from stainless steel with a galvanized surface, this genuine ELORA product is manufactured in Germany.
BETEX AHP aluminum hand pump set, rated at 700 bar, includes pre-mounted single/double-acting pumps, T-adaptor, pressure gauge, 1.5m hose, couplings, and a steel case, ready for immediate industrial and routine use.
Twofold ground main cutting edges and circumferential cutters. Effective length of the plug max. 70 mm
Place 1616 at the edge of the work piece in a way that the outside of the cutter is overlapping the edge, allowing fast chip ejection
Especially suitable for measuring tasks in the fields of joinery, electrical installations,tiling, heating installation and for DIY enthusiasts.
Traditional Forstner bit with centre point, two main cutting edges and two circumferential cutters. Low friction due to the reduced peripheral cutting edge
Made from Copper-Beryllium alloy, it minimizes sparks and is ideal for oil and gas, chemical, and explosive areas. With a bi-hexagon design and reversible ratchet, it provides secure and efficient tightening or loosening of fasteners.
Non-sparking ring slogging spanner according to DIN 7444. Use for the explosive environment such as oil and gas, mining, electricity. High hardness values from 25-30 HRC. Tensile Strength 782 N/mm² – 989 N/mm².
Stainless steel shim size B, measuring 100 x 100mm, size M30. Precision machined on a CNC machine for high accuracy. Each stainless steel shim piece is equipped with pre-drilled holes for easy removal when necessary. All edges are rounded, minimizing the risk of tearing the shim at critical locations.
BETEX NSSS single-acting cylinders are robust, reliable, and suitable for a wide range of hydraulic applications. Their design features and high working pressure make them a valuable choice for industries requiring efficient and durable hydraulic systems.
SIDSP® stands for Sensor-Integrated Digital Signal Processing – a technology where the signals are completely processed into digital form inside the sensor at the time and point of measurement. SIDSP® sensors are manufactured according to completely new state-of-the-art production techniques.
features a guide sleeve for precision, a knurled shaft for grip, and a finely ground and polished finish. The driving point is crafted from 115CrV3 steel with a hardness of 55-59 HRC, suitable for professional-grade applications.
• reading from left to right • semi rigid version, with wide cross section • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • up to 2000 mm in a vinyl bag
The ELORA 110 Double-Ended Ring Spanners, excel in adhering to strict industry standards like DIN 838, ISO 3318, ISO 1085, and ISO 10104. Featuring a deep-cranked design for versatility in tight spaces, these spanners boast matte chrome plating for durability and break-resistant quality for safety. Crafted from ELORA-Chrome-Vanadium 31CrV3 / 1.2208 alloy, they’re the epitome of long-lasting, high-performance tools.
Stainless steel shim size B, measuring 75x75mm, size M20. Precision machined on a CNC machine for high accuracy. Each stainless steel shim piece is equipped with pre-drilled holes for easy removal when necessary. All edges are rounded, minimizing the risk of tearing the shim at critical locations.
Drop forged hammer head Inductive hardened and coated Face and peen polished Ash handle Mechanically fixed with a ring steel wedge and epoxide resin
acc. to workshop grade • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • graduation reading from left to right, zero-point in the middle • top and bottom 1/1 mm graduation
Especially suitable for use in metal construction, for joinery and for DIY enthusiasts.
BETEX Mobipuller, designed for heavy-duty dismounting, is a mobile hydraulic puller for solo use, suitable for removing bearings, couplings, and gears. It offers models with 25-50 ton capacities, adjustable height, safety features, and remote control for electric versions.
Titanium nitrified twist drill, fully ground from the solid, right hand cutting, with spiral type N. Crosswise sharpened acc. to DIN 1412C (from 3,0 mm) 118° for good centering and fast drilling. Tolerance of diameter h8. Professional hard-wearing coating for a long service life
Twist drill made of cobalt alloyed HSS-G, acc. to DIN 340, fully ground from the solid, long version, special spiral form, for a good chip removal when drilling deep holes and for greasing materials. Crosswise sharpened acc to. DIN 1412C, point angle 135°, tolerance of diameter h8
Bormax® 2.0 prima with exchangeable pre-drill bit, centre drill bit or guiding pin. Much less feed force needed as well as minimized friction and therefore less heat generation. Reasons: The two main cutting edges are grooved shifted, as well as the toothed linear grooved pre-cutters. A matching centre drill bit and an allen wrench are included in the delivery. Hexagonal shank for a better power transfer
If you are looking for a level with strong rare earth magnets, this is the right one to fit your needs. Countless professional builders have used the Type 70 M as their level of choice. They are reliable and very accurate. And thanks to its rare earth magnets it has a strong holding-power on steel. Because of the large range of sizes you have the ability to level across spaces from 30 cm up to 200 cm. As with all STABILA levels the vial is precisely aligned with the measuring surface then locked together ensuring long life accuracy.
Premium version, fully ground quality with two main cutting edges and two taper taps. Specially ground spiral for a very good chip removal. 2400 – 8000 rpm e.g. Ø 4 mm 5000 rpm in European hard wood. Further details in the speed diagram
• for quick and easy measuring of bores • standard precision, for workshop use • matt chrome finish pipe, with insulated plates • carbid-tipped contact points for durability • with operation manual
Ideal for work in the fields of timber frame construction, prefabricated walls, building components, precast concrete parts and system formworks. The measuring surface formed from two fixed spacers bridges irregularities in the material and allows precise measuring, e. g. over warped beams.
With brad point, two main cutting edges and protruding cutting edges. 1000 – 5000 rpm e.g. Ø 5 mm 5000 rpm in softwood. Further details in the speed diagram
• for adjusting, levelling etc. • rolled in a rugged plastic box or as stripes in a case with 10 or 5 blades • different material in different width and different length available
Twist drill, made of cobalt alloyed HSS, acc. to DIN 338, fully ground from the solid. Fitted with a special spiral for good chip removal and greasing materials. Crosswise sharpened acc. to DIN 1412C, point angle 135°, tolerance of diameter h8
Special twist drill made of cobalt alloyed HSS, acc. to DIN 1869, fully ground of the solid, extra long version, right hand cutting. Profile crosswise sharpened 135°
type B = ½ mm / mm top ½ mm and bottom 1/1 mm graduation reading from right to left • semi rigid version, with wide cross section • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • up to 2000 mm in a vinyl bag
The additional vertical vial allows quick readings in any position. Accuracy in normal position: 0.029° = 0.5 mm/m. Measuring surfaces: 1 x. Vial type: 1 x horizontal, 2 x vertical. End caps: Standard. Made in Germany
Spanner with 02 sizes open, non-sparking, according to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Material Cu-Be. Made by ELORA Germany. Other size upon on request.