Returning Customer ?
Don't have an account ?
Showing all 25 results
Twist drill with long shank and specially ground roof-like tip which can be regrounded easily. Quality according to DIN 7490 and the valid safety regulations
Stainless steel shim size B, measuring 100 x 100mm, size M30. Precision machined on a CNC machine for high accuracy. Each stainless steel shim piece is equipped with pre-drilled holes for easy removal when necessary. All edges are rounded, minimizing the risk of tearing the shim at critical locations.
Non-sparking ring slogging spanner according to DIN 7444. Use for the explosive environment such as oil and gas, mining, electricity. High hardness values from 25-30 HRC. Tensile Strength 782 N/mm² – 989 N/mm².
Vogel Germany, DIN 875/0 standards, is essential for inspection rooms and test laboratories. Made from stainless or special hardened steel, it features an extra fine ground surface and is available in flat or with back designs.
Non-sparking striking ring wrench 0100S AlCu alloy material. DIN 7444 standard, load-bearing beam-type die-cast body. The wide handle is easy to close. Used for petroleum, chemical environment. Elora Germany. Nationwide Delivery.
• flexible design because of narrow cross section • stainless spring steel – non glare, matt surface • front: top 1/1 mm and bottom 1/1 mm graduation • back: top ½ mm and bottom ½ mm graduation • etched graduation for a clear reading – cm graduation
Hydraulic single acting BETEX JLLC cylinders offer 50-1000 ton capacity, 50-300 mm stroke, and 700 bar pressure. Features include a safety locknut, piston protection ring, interchangeable saddle, high-flow coupler, and a durable black nitride finish for heavy-duty applications.
BETEX ALNC cylinders: lightweight aluminum, 50-100 ton capacity, 50-250 mm stroke, 700 bar pressure, locknuts for safety, easy handling, heavy-duty spring, roll-polished interior, corrosion-resistant anodized coating.
BETEX JLPC hydraulic cylinders, high tonnage, compact, feature load return, safety locknut, and blow-out protection. Ideal for confined spaces, these are durable and versatile for industrial applications.
Steel single acting cylinder, short stroke. All rams are single acting with spring return. Hard chromed piston. Rams inside roll-polished, outside blasted with black nitride finish. Bega Special Tools – BETEX Hydraulic.
Clamping force up to 8,000 N. Very large parallel clamping surfaces with 3 removable pressure caps Metal-reinforced plastic housing and optimised sliding arm with double slide protection for more power and safety: The set clamping force is maintained and the sliding arm cannot unintentionally slip in the unclamped condition.
Engineer’s hammer, German pattern 1665, offers a range of head weights from 100 to 2000g. It features a drop-forged and inductively hardened hammer head with safety collar, a polished face and peen, an ash handle with nylon shaft protection, and mechanical attachment using a steel ring wedge and epoxy resin.
“Lewis” pattern, crest of thread, main cutting edge and taper tap in premium quality. Version with stepped head and hexagonal shank from Ø 8mm.
500 – 2800 rpm. e.g. Ø 12 mm 2000 rpm in soft wood. Further details in the speed diagram
Matt chrome plated, heads ground. ELORA-Chrome-Vanadium 31CrV3 / 1.2208. According to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Made in Germany
• special wear-resistant casting with additionally steel • strong ribbed construction, side surfaces reinforced • measuring surface according to DIN 876 • side surfaces carefully planed or milled • with supporting points, corresponding to the size of plate • against extra charge we supply the plates with handle and with protective wooden cover
Offers 20% more clamping force per rotation, up to 6,000 N, with secure force transfer and tempered steel construction. Features ergonomic handle and tool-free pressure plate replacement. Made in Germany.
Screwdriver Socket 3/8″ Long 3244-TXL-45, designed for inside TORX® screws, features chrome-plated finish, knurled grip, durable materials, and precision engineering for reliable TORX® screw work. By Elora made in Germany.
Type A = mm / mm top and bottom 1/1 mm graduation • reading from left to right • semi rigid version, with wide cross section • stainless spring steel, with non glare, matt surface • precise, deep graduation with laser engraved, continuing numbers • with identification-no. and calibration certificate
Twist drill, made of cobalt alloyed HSS, acc. to DIN 338, fully ground from the solid. Fitted with a special spiral for good chip removal and greasing materials. Crosswise sharpened acc. to DIN 1412C, point angle 135°, tolerance of diameter h8
Spanner with 02 sizes open, non-sparking, according to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Material Cu-Be. Made by ELORA Germany. Other size upon on request.
acc. to workshop grade • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • graduation reading from left to right, zero-point in the middle • top and bottom 1/1 mm graduation
Type B = ½ mm / mm top ½ mm and bottom 1/1 mm graduation • reading from left to right • semi rigid version, with wide cross section • stainless spring steel, with non glare, matt surface • precise, deep graduation with laser engraved, continuing numbers • with identification-no. and calibration certificate