Returning Customer ?
Don't have an account ?
Showing 1126–1170 of 1522 results
• with inch graduation • for standard expectations • drum and sleeve matt chrome finish • frame hammer blow grey lacquered, with insulation plates
• easy handling and precise reading • mechanical digital counter, frame lacquered, with insulation plates • carbide surfaces, lapped, spindle hardened and ground • with ratchet for constant measuring pressure
• for standard requirements in measuring • drum and sleeve matt chrome finish • frame hammer blow grey lacquered, with insulation plates • carbide surfaces, lapped, spindle hardened and ground • locking lever for quick and precise fixing • with ratchet for constant measuring pressure • with adjustment key, from up 25 mm with setting gauge
• for measuring plates and panels • 100 step graduation • with deep frame • drum and sleeve matt chrome finish
• large measuring range • with adjustable anvil • with lightmetal frame • with 50 mm spindle revolution
• stainless steel, hardened, vernier and scale matt chrome finish • surfaces finely ground, with fixing screw • mono block vernier, reading 0.05 mm
• spring loaded end gauges • with screw-on extensions • up to 6000 mm measuring range available • drum and sleeve matt chrome finish
• high standard quality, for calibration purposes • drum and sleeve matt chrome finish • measuring pin and surface hardened and fine ground • measuring face plane ground and lapped • clamping wheel for quick and precise fixing • with ratchet for constant measuring pressure
• absolute System, high accuracy, with data output RS232 • LCD display with clear reading, mm/inch switchable • frame lacquered, with insulation plates • ORIGIN button, ABS/INC measurement system
• resiliently mounted end gauges • with screw-on extensions • up to 1450 mm measuring range available • drum and sleeve matt chrome finish
• triple-jointed arm with central mechanical clamping • all joints are clamped with just one twist grip • ball joints allow a fast and safe positioning
• special wear-resistant casting with additionally steel • strong ribbed construction, side surfaces reinforced • measuring surface according to DIN 876 • side surfaces carefully planed or milled • with supporting points, corresponding to the size of plate • against extra charge we supply the plates with handle and with protective wooden cover
• special wear-resistant casting with additionally steel • strong ribbed construction, side surfaces reinforced • measuring surface according to DIN 876 • side surfaces carefully planed or milled
• solid or ribbed construction • special wear resistant steel casting • surfaces and four sides fine planed • against extra charge the plates can be supplied also with bores, holes or T-slots
• solid angular steel construction, powder coated, grey (RAL 7001) • 3-point support M 24 x 80 mm • 2 extra support for tipping protection, with adjusting screws • single packed on an Euro-pallet
• especially for maintenance and service tasks for lifts • special set for lift and wire/cable measurement • with LCD display for optical or mechanical speed detection
For testing the acid density on conventional batteries with screw caps. Areometers are valuable tools for measuring density or specific gravity, and they find applications in a wide range of industries where precise measurements of liquid density are required.
• for checking and transferring angles • large LCD display with clear reading, digit height 10 mm • blades in anodized aluminium with profile grooves, and embedded magnet strips • On/Off button and data hold function, with fixing screw • 180° rotating display, by pressing function button
• top quality, for calibration purpose • stainless, hardened and fine ground • scales matt chrome finish • parallaxfree reading by vernier, with large magnifying lens • with fine adjustment
Universal Bevel Protractor Set offers a reliable and precise solution for measuring angles. With its three blades of different lengths, stainless steel construction, fine adjustment capability, and parallax-free reading.
for external retaining rings acc. to DIN 471, DIN 983 straight jaws, self-opening due to mounted spiral spring gunmetal-finish, ground joint
For external retaining rings acc. to DIN 471, DIN 983 Straight jaws, self-opening due to mounted spiral spring Gunmetal-finish, ground joint Red dip insulated handles ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
– for inside hexagon screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon according to DIN 3126 C 6,3, ISO 1173 – according to DIN ISO 2351-3
– for inside multi-point B&S and XZN screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon according to DIN 3126 C 6,3, ISO 1173
– for RIBE®-CV-screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3126 C 6,3, ISO 1173 – RIBE® = reg. trademark of Richard Bergner GmbH & Co KG, Schwabach
– for TORX Plus® IPR-screws -ELORA-Chrom-Molybdän-Vanadium 73MoV5-2 / 1.2381 -male hexagon according to DIN 3126 C 6,3, ISO 1173 -TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
– for inside TORX® screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon according to DIN 3126 C 6,3, ISO 1173 – TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
– for inside-TORX® safety screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon according to DIN 3126 C 6,3, ISO 1173 – TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
– cross-slotted head screws PH – 1/4″ hexagonal shank – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2/ 1.2381
– for plain slotted screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 -male hexagon drive according to DIN 3126 C 8, DIN ISO 1173 -according to DIN ISO 2351-1
– for inside hexagon screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3126 C 8, DIN ISO 1173 – according to DIN ISO 2351-3
– for cross slotted screws PH – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3126 C 8, DIN ISO 1173 – according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PH
– for cross slotted screws PZ – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon according to DIN 3126 C 8, DIN ISO 1173 – according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PZ
– for inside multi-point B&S and XZN screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3126 C 8, DIN ISO 1173
– for inside TORX® screws – ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3128 C 8, DIN ISO 1173 – TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
– for inside-TORX® safety screws – ELORA Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 – male hexagon drive according to DIN 3126 C 8, DIN ISO 1173 – TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
– bit lock with permanent magnet and quick clamping system – quick locker and ejection system – female hexagon drive according to DIN 3126 D 6,3 – male hexagon drive according DIN 3126 E 6,3, DIN ISO 1173
– bit lock with permanent magnet resp. spring clips – with stainless steel sleeve, diameter 9,5 mm – female hexagon drive according to DIN 3126 D 6,3 – male hexagon drive according DIN 3126 E 6,3 DIN ISO 1173 – according to DIN 7427 Form D
4100-is IMPACT SCREWDRIVER INSERT BITS DIN 3126 E 6,3
designed for pressing cable end-sleeves, featuring a side cutter and wire stripping mechanism. Made from high-grade steel C45, it’s available in 155mm and 220mm lengths, embodying German precision and durability.
Screw pitch gauges measure thread pitch, offering diverse models for metric, Whitworth, and American standard threads (UNC, UNF, SAE). Each gauge has specific blades and ranges, essential for mechanical engineering and manufacturing applications.
• for testing of raised and recessed curves • concave and convex shaped blades • fine cutted forms
