Returning Customer ?
Don't have an account ?
Showing all 42 results
Stainless steel shim size B, measuring 100 x 100mm, size M30. Precision machined on a CNC machine for high accuracy. Each stainless steel shim piece is equipped with pre-drilled holes for easy removal when necessary. All edges are rounded, minimizing the risk of tearing the shim at critical locations.
The GG 2 accuracy grade as defined in DIN 874 refers to a general level of precision suitable for various applications where extremely high accuracy is not needed. VOGEL Germany.
Non-sparking ring slogging spanner according to DIN 7444. Use for the explosive environment such as oil and gas, mining, electricity. High hardness values from 25-30 HRC. Tensile Strength 782 N/mm² – 989 N/mm².
The AC-00 Angled Head Bolt Cutter is made from carbon tool steel, with offset 30-degree cutting edges. It comes in three sizes (AC-0030, AC-0045, AC-0060) with cutting capacities ranging from 5mm to 10mm. MCC – Made in Japan.
Spare blade made of high-pressure forged steel for AC-0030, AC-0045, AC-0060 angled head bolt cutters. Cutting diameter from Ø5mm to Ø10mm at 80 HRB hardness, blade inclined 30 degrees, durability 10000 standard cuts. 100% Made in Japan.
• reading from left to right • semi rigid version, with wide cross section • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • up to 2000 mm in a vinyl bag
A spare blade for bolt cutters is an additional cutting blade that can be used to replace the original blade of the bolt cutters. Bolt cutters are a hand tool designed to cut through materials such as chains, wires, cables, and bolts.
• flexible design because of narrow cross section • stainless spring steel – non glare, matt surface • front: top 1/1 mm and bottom 1/1 mm graduation • back: top ½ mm and bottom ½ mm graduation • etched graduation for a clear reading – cm graduation
Mobile storage for stainless steel shims in various sizes and thicknesses. Available in three models, they accommodate precision alignment tasks with ease, compatible with Betex tools for comprehensive application support.
REMS Curvo – wrinkle-free bending. Universal for many pipes and tubes. Instant use without setting. Fast and creep speed operation for precise bending. Quick change of bending and back formers.
• precision class • stainless steel, hardened • scale and vernier satin chrome finish, laser engraved scale • jaws finely ground • offset jaws for inside measurements • with or without fine adjustment, without knife points
Measures internal and external dimensions within 200-300mm range, featuring a 0.05mm/1/128 inch vernier scale, stepped jaws, knife points, a locking screw, and a thread table. Made of stainless steel with a matt chrome finish, it complies with DIN 862 standards.
Standard geared trolley hand chain length – 2.5m. We can change the length to suit your requirements. Also available with locking device – ask us for details Geared Trolleys (AGT/TG) Extra per metre ($) galvanised hand chain 5.90
ELORA 1580 inside caliper, ranging from 200mm to 300mm, is essential for precise internal measurements in mechanical and manufacturing industries. Made of polished steel with a riveted hinge for stability, it’s durable, corrosion-resistant, and versatile for various sizes and applications. Manufactured in Germany.
Matt chrome plated, heads ground. ELORA-Chrome-Vanadium 31CrV3 / 1.2208. According to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Made in Germany
Made of hardened stainless steel, measures 200-300mm with a non-glare, locking screw feature for stability. It features a laser-engraved 1mm metric scale, round bridge measurement, and a type A
Traditional Forstner bit with centre point, two main cutting edges and two circumferential cutters. Low friction due to the reduced peripheral cutting edge
“Lewis” pattern, crest of thread, main cutting edge and taper tap in premium quality. Version with stepped head and hexagonal shank from Ø 8mm.
500 – 2800 rpm. e.g. Ø 12 mm 2000 rpm in soft wood. Further details in the speed diagram
Combination Spanner 200-Series, made in Germany, is a top-quality stainless steel tool. It conforms to DIN 3113, Form B, ISO 3318, and ISO 7738 standards, offering precision and durability. With a cranked design and no galvanic surface treatment, it’s perfect for rustless bolted connections. Elora Germany.
– very light, good handling, midsection lacquered – high accuracy- and pliability-values – HC-coated and compressed, coating thickness 50µ ± 5µ. – quality DIN 874 page 1, accuracy GG 0, GG 1 or GG 2.
Titanium nitrified twist drill, fully ground from the solid, right hand cutting, with spiral type N. Crosswise sharpened acc. to DIN 1412C (from 3,0 mm) 118° for good centering and fast drilling. Tolerance of diameter h8. Professional hard-wearing coating for a long service life
Twist drill, made of cobalt alloyed HSS, acc. to DIN 338, fully ground from the solid. Fitted with a special spiral for good chip removal and greasing materials. Crosswise sharpened acc. to DIN 1412C, point angle 135°, tolerance of diameter h8
Twist drill made of cobalt alloyed HSS-G, acc. to DIN 340, fully ground from the solid, long version, special spiral form, for a good chip removal when drilling deep holes and for greasing materials. Crosswise sharpened acc to. DIN 1412C, point angle 135°, tolerance of diameter h8
Numbering up to 500 mm lenght with continuing mm numbering. The rules from 1000 mm up to 2000 mm lenght with continuing cm numbering. The rules according to EC Class I and are qualified as reference pieces.
•quality DIN 866 form A • mm graduation on bottom edge • 5 mm protection space on both ends • flat side finely ground • vertical edges finely ground, can be used as a rule • stainless or carbon steel quality available
• mm graduation on bottom edge • without protection-space end, at left side • flat side ground • vertical edges ground • stainless or carbon steel quality available
type B = ½ mm / mm top ½ mm and bottom 1/1 mm graduation reading from right to left • semi rigid version, with wide cross section • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • up to 2000 mm in a vinyl bag
Type D = inch / mm top 1/64 ; 1/32 and 1/16 inch graduation, bottom ½ mm and 1/1 mm • semi rigid version, with wide cross section • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • up to 2000 mm in a vinyl bag
• for simple workshop use • made of steel • chromed version • type A = without graduation, type B = with mm graduation • graduation black etched, bevel edge matt chrome finish
acc. to DIN 2014/32/EU • reading from left to right or right to left • precise, deep graduation laser engraved, continuing numbers • non glare, matt surface • stainless spring steel • with identification-no
Spanner with 02 sizes open, non-sparking, according to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Material Cu-Be. Made by ELORA Germany. Other size upon on request.
• reading from left to right • with conversion table on the backside • etched graduation for a clear reading • non glare, matt surface • stainless spring steel
acc. to workshop grade • stainless spring steel • non glare, matt surface • etched graduation for a clear reading • graduation reading from left to right, zero-point in the middle • top and bottom 1/1 mm graduation
• for simple workshop use • made of steel • chromed version • type A = without graduation • graduation black etched, bevel edge matt chrome finish
For round and flat material With adjustment screw Quick release lever with return spring Forged, hardened and tempered half-round jaws Made in Germany
With brad point, two main cutting edges and protruding cutting edges. 1000 – 5000 rpm e.g. Ø 5 mm 5000 rpm in softwood. Further details in the speed diagram
• reading from left to right • graduation on front- and rearside • stainless spring steel • non glare, matt surface • laser engraved scale for a clear reading front top ½ mm and bottom 1/1 mm graduation back top 1/16; 1/32; 1/64 inch – bottom 1/10; 1/20; 1/50; 1/100 inch